How can I get a price quote for Siemens 6AG1153-2BA10-7XB0?

You can request a fast quote for Siemens 6AG1153-2BA10-7XB0 from Yılsa Engineering. Reference part number CEY-8EF3B038830C. Submit a request via the contact or quote form and our team replies shortly with price and lead time.

Is Siemens 6AG1153-2BA10-7XB0 in stock and what is the delivery time?

Yılsa Engineering sources products as genuine items through a wide supplier network. Typical lead time is 7-21 days, with 1-3 business days domestic transit in Türkiye. Current status is confirmed in the quote.

Is Siemens 6AG1153-2BA10-7XB0 genuine and new?

Yes. This Siemens product is supplied genuine and brand-new, sold with invoice under Yılsa Engineering assurance.

How do I get the datasheet and technical specs for Siemens 6AG1153-2BA10-7XB0?

Key technical specifications are listed on the product page. For the full datasheet, dimensions and compatibility, simply contact Yılsa Engineering.

Photo may not represent actual item. Refer to name and product specs for all details.

Siemens 6AG1153-2BA10-7XB0

Replacement only, no repair. IM153-2 (*BA02) based on 6ES7153-2BA10-0XB0 with conformal coating, -40…+70 °C, start up -25 °C, connection ET 200M IM 153-2 High Feature for max. 12 S7-300 modules with redundancy capability, time stamp. suitable for isochronous mode new features: up to 12 modules can be used device initiative for drive ES and switch ES expanded quantity structure for HART auxiliary variables operation of the 64-channel modules 32 signals/slot

SiemensMFR # 6AG1153-2BA10-7XB0SKU # CEY-8EF3B038830C

Product type designationIM 153-2 HF

Firmware versionV6.0.0

Vendor identification (VendorID)801Eh

based on6ES7153-2BA10-0XB0

Rated value (DC)24 V

permissible range, lower limit (DC)20.4 V

Have questions?Chat on WhatsApp

About This Product

Siemens 6AG1153-2BA10-7XB0

Genuine, certified Siemens product
Fast sourcing through a worldwide supply network
Product selection and compatibility support from our technical team
Equivalent and alternative product suggestions
Quotation and lead time tailored to your request

Specifications

General information

Product type designationIM 153-2 HF

Firmware versionV6.0.0

Vendor identification (VendorID)801Eh

based on6ES7153-2BA10-0XB0

Engineering with

STEP 7 configurable/integrated from versionsee entry ID: 109746275

Supply voltage

Rated value (DC)24 V

permissible range, lower limit (DC)20.4 V

permissible range, upper limit (DC)28.8 V

external protection for power supply lines (recommendation)2,5 A

Mains buffering

Mains/voltage failure stored energy time5 ms

Input current

Current consumption, max.650 mA; with 24 V DC supply

Inrush current, typ.3 A

I²t0.1 A²·s

Output current

for backplane bus (5 V DC), max.1.5 A

Power loss

Power loss, typ.5.5 W

Address space per module

Inputs244 byte

Outputs244 byte

Hardware configuration

number of modules per DP device interface, max.12

Time stamp

Accuracy1 ms; 1 ms at up to 8 modules; 10 ms at up to 12 modules

Number of message buffers15

Messages per message buffer20

Number of stampable digital inputs, max.128; Max. 128 signals/station; max. 32 signals/slot

Time formatRFC 1119

Time resolution0.466 ns

Time interval for transmitting the message buffer if a message is present1 000 ms

Time stamp on signal changerising / falling edge as signal entering or exiting

Interfaces

Transmission procedureRS 485

Transmission rate, max.12 Mbit/s

1. Interface

automatic detection of transmission rateYes

Interface types

Output current of the interface, max.70 mA

Design of the connection9-pin sub D socket

PROFIBUS DP device

GSD fileSI05801E.GSG

automatic baud rate searchYes

Protocols

Bus protocol/transmission protocolPROFIBUS DP to EN 50170

Protocols (Ethernet)

TCP/IPNo

PROFIBUS DP

Number of node addresses, max.1 to 125 permitted

Services

— SYNC capabilityYes

— FREEZE capabilityYes

— Direct data exchange (slave-to-slave communication)Yes; as publisher with all IO, as subscriber with F-IO only

Potential separation

Potential separation existsYes

Isolation

Isolation tested withIsolation voltage 500 V

Degree and class of protection

IP degree of protectionIP20

Ambient temperature during operation

min.-40 °C; = Tmin; Startup @ -25 °C

max.70 °C; = Tmax

At cold restart, min.-25 °C

Ambient temperature during storage/transportation

min.-40 °C

max.70 °C

Altitude during operation relating to sea level

Installation altitude above sea level, max.5 000 m

Ambient air temperature-barometric pressure-altitudeTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)

Relative humidity

With condensation, tested in accordance with IEC 60068-2-38, max.100 %; RH incl. condensation/frost (no commissioning under condensation conditions)

Use in stationary industrial systems

— to biologically active substances according to EN 60721-3-3Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request

— to chemically active substances according to EN 60721-3-3Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *

— to mechanically active substances according to EN 60721-3-3Yes; Class 3S4 incl. sand, dust, *

Use on ships/at sea

— to biologically active substances according to EN 60721-3-6Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request

— to chemically active substances according to EN 60721-3-6Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *

— to mechanically active substances according to EN 60721-3-6Yes; Class 6S3 incl. sand, dust; *

Usage in industrial process technology

— Against chemically active substances acc. to EN 60654-4Yes; Class 3 (excluding trichlorethylene)

— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)

Remark

— Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04* The supplied plug covers must remain in place over the unused interfaces during operation!

Configuration software

STEP 7Yes; STEP 7 / COM PROFIBUS / non-Siemens tools via GSD file

Dimensions

Width40 mm

Height125 mm

Depth117 mm

Weights

Weight, approx.360 g

Accessories 10

Genuine accessories that can be used with the Siemens 6AG1153-2BA10-7XB0 motor and are supplied separately are listed below. Click a code to open the accessory page and see the other compatible motors.

Part no	Description	Compatible motors
6ES7972-0BA12-0XA0	Aksesuar · PROFIBUS connector
6ES7972-0BA42-0XA0	Aksesuar · PROFIBUS connector
6ES7972-0BA52-0XA0	Aksesuar · PROFIBUS connector
6ES7972-0BA61-0XA0	Aksesuar · PROFIBUS connector
6ES7972-0BA70-0XA0	Aksesuar · PROFIBUS connector
6ES7972-0BB12-0XA0	Aksesuar · PROFIBUS connector
6ES7972-0BB42-0XA0	Aksesuar · PROFIBUS connector
6ES7972-0BB52-0XA0	Aksesuar · PROFIBUS connector
6ES7972-0BB61-0XA0	Aksesuar · PROFIBUS connector
6ES7972-0BB70-0XA0	Aksesuar · PROFIBUS connector