How can I get a price quote for Siemens 6AG2132-6FD00-4CU0?

You can request a fast quote for Siemens 6AG2132-6FD00-4CU0 from Yılsa Engineering. Reference part number YLS9SOZKOCU9UR. Submit a request via the contact or quote form and our team replies shortly with price and lead time.

Is Siemens 6AG2132-6FD00-4CU0 in stock and what is the delivery time?

Yılsa Engineering sources products as genuine items through a wide supplier network. Typical lead time is 7-21 days, with 1-3 business days domestic transit in Türkiye. Current status is confirmed in the quote.

Is Siemens 6AG2132-6FD00-4CU0 genuine and new?

Yes. This Siemens product is supplied genuine and brand-new, sold with invoice under Yılsa Engineering assurance.

How do I get the datasheet and technical specs for Siemens 6AG2132-6FD00-4CU0?

Key technical specifications are listed on the product page. For the full datasheet, dimensions and compatibility, simply contact Yılsa Engineering.

Click to zoom

Photo may not represent actual item. Refer to name and product specs for all details.

Siemens 6AG2132-6FD00-4CU0

SIPLUS ET 200SP DQ 4x24..230VAC TX rail based on 6ES7132-6FD00-0CU0 with conformal coating, -40…+70 °C, OT4 with ST1/2 (+85 °C for 10 minutes), digital output module, suitable for BU type U0, color code CC20, channel diagnostics two alternative operating modes: DQ and power control,

SiemensMFR # 6AG2132-6FD00-4CU0SKU # YLS9SOZKOCU9UR

Product type designationDQ 4x24 ... 230 V AC/2 A HF

FW update possibleYes

based on6ES7132-6FD00-0CU0

usable BaseUnitsBU type U0

I&M dataYes; I&M0 to I&M3

Isochronous modeNo

Have questions?Chat on WhatsApp

About This Product

Siemens 6AG2132-6FD00-4CU0

Genuine, certified Siemens product
Fast sourcing through a worldwide supply network
Product selection and compatibility support from our technical team
Equivalent and alternative product suggestions
Quotation and lead time tailored to your request

Specifications

General information

Product type designationDQ 4x24 ... 230 V AC/2 A HF

FW update possibleYes

based on6ES7132-6FD00-0CU0

usable BaseUnitsBU type U0

Color code for module-specific color-coded labelCC20

Product function

I&M dataYes; I&M0 to I&M3

Isochronous modeNo

Engineering with

STEP 7 TIA Portal configurable/integrated from versionsee entry ID: 109746275

Operating mode

DQYes

DQ with energy-saving functionYes

PWMNo

OversamplingNo

MSONo

Phase controlYes; Control area: 8.5 ... 100% of the phase angle

Trailing-edge phaseNo

Half-waveYes

Full-waveYes

Supply voltage

Rated value (AC)230 V; 47 ... 63 Hz, max. rate of change of frequency 1 mHz/s

permissible range, lower limit (AC)20.4 V

permissible range, upper limit (AC)264 V

Input current

Current consumption (rated value)8 mA; without load

Output voltage

Rated value (AC)230 V; 24V AC to 230V AC

Power loss

Power loss, typ.9 W; Active power, load voltage 230 V, all outputs loaded with 2 A, 50 Hz

Address space per module

Inputs+ 1 byte for QI information

Outputs8 byte

Hardware configuration

Automatic encodingYes

Mechanical coding elementYes

Selection of BaseUnit for connection variants

1-wire connectionBU type U0

2-wire connectionBU type U0

3-wire connectionBU type U0 + Potential distributor module

Digital outputs

Type of digital outputTriac

Number of digital outputs4

Current-sinkingNo

Current-sourcingYes

Digital outputs, parameterizableYes

Short-circuit protectionNo; external fusing necessary

Open-circuit detectionYes; channel by channel

Response threshold, typ.1 mA; 40 V AC or more

Overload protectionNo; A miniature fuse with 10 tripping current and tripping characteristic "quick response" must be provided in the module supply

Controlling a digital inputYes

Switching capacity of the outputs

with resistive load, max.2 A; Max. 4 A, see additional description in manual

with inductive load, max.2 A

on lamp load, max.100 W; Tungsten rating in accordance with UL; for thermistors with higher power ratings, see the notes in the manual

Output voltage

for signal "1", min.20.4 V

Output current

for signal "1" rated value2 A

for signal "1" permissible range, min.10 mA

for signal "1" permissible range, max.4 A; note derating data in the manual

for signal "0" residual current, max.3 mA

Output delay with resistive load

"0" to "1", max.40 ms; 2 AC cycles

"1" to "0", max.20 ms; 1 AC cycle

Parallel switching of two outputs

for logic linksNo

for upratingNo

for redundant control of a loadYes

Switching frequency

with resistive load, max.10 Hz; Applies to DQ mode; limited by line frequency in PC mode

with inductive load (acc. to IEC 60947-5-1, AC15), max.10 Hz; Applies to DQ mode; limited by line frequency in PC mode

on lamp load, max.1 Hz; Applies to DQ mode; limited by line frequency in PC mode

Total current of the outputs

Current per channel, max.2 A; Max. 4 A, see additional description in manual

Current per module, max.8 A

horizontal installation

— up to 40 °C, max.8 A; Applicable for current channels up to 2 A. For current channels between 2 A and 4 A, note derating data in the manual

— up to 50 °C, max.6 A; Applicable for current channels up to 2 A. For current channels between 2 A and 4 A, note derating data in the manual

— up to 60 °C, max.4 A; Applicable for current channels up to 2 A. For current channels between 2 A and 4 A, note derating data in the manual

— up to 70 °C, max.2 A; Applicable for current channels up to 2 A

vertical installation

— up to 30 °C, max.8 A

— up to 40 °C, max.6 A

— up to 50 °C, max.4 A

Cable length

shielded, max.1 000 m

unshielded, max.600 m

Interrupts/diagnostics/status information

Diagnostics functionYes

Substitute values connectableYes

Alarms

Diagnostic alarmYes

Diagnoses

Diagnostic information readableYes

Monitoring the supply voltageYes

Wire breakYes; channel by channel

Short-circuitNo

Group errorYes

Diagnostics indication LED

Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED

Channel status displayYes; green LED

for channel diagnosticsYes; red Fn LED

for module diagnosticsYes; green/red DIAG LED

Potential separation channels

between the channelsNo

between the channels and backplane busYes

between the channels and the power supply of the electronicsNo

Isolation

Isolation tested with2 545 V DC (type test) and according to EN 50155 (routine test)

Standards, approvals, certificates

Suitable for safety functionsNo

Railway application

EN 50121-3-2Yes; EMC for rail vehicles

EN 50121-4Yes; EMC for signal and telecommunications systems

EN 50121-5Yes; EMC for fixed installations and railway power supply equipment (shielded cables required)

EN 50124-1Yes; Railway applications - overvoltage category OV3; pollution degree PD2; UNm = 230 V AC

EN 50125-1Yes; Rail vehicles - see ambient conditions

EN 50125-2Yes; Stationary electrical equipment - see ambient conditions

EN 50125-3Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)

EN 50155Yes; Rail vehicles - temperature class OT4, ST1/ST2, horizontal mounting position

EN 61373Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B

Fire protection acc. to EN 45545-2Yes; For proof of conformity, see Service & Support

Ambient temperature during operation

horizontal installation, min.-40 °C; = Tmin (incl. condensation/frost)

horizontal installation, max.70 °C; = Tmax; +85 °C for 10 min (OT4, ST1/ST2 acc. to EN 50155)

vertical installation, min.-40 °C; = Tmin

vertical installation, max.50 °C; = Tmax

Altitude during operation relating to sea level

Installation altitude above sea level, max.2 000 m

Ambient air temperature-barometric pressure-altitudeTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m)

Relative humidity

With condensation, tested in accordance with IEC 60068-2-38, max.100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation

Coolants and lubricants

— Resistant to commercially available coolants and lubricantsYes; Incl. diesel and oil droplets in the air

Use in stationary industrial systems

— to biologically active substances according to EN 60721-3-3Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request

— to chemically active substances according to EN 60721-3-3Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *

— to mechanically active substances according to EN 60721-3-3Yes; Class 3S4 incl. sand, dust, *

— Against mechanical environmental conditions acc. to EN 60721-3-3Yes; Class 3M8 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0)

Use on land craft, rail vehicles and special-purpose vehicles

— to biologically active substances according to EN 60721-3-5Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request

— to chemically active substances according to EN 60721-3-5Yes; Class 5C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *

— to mechanically active substances according to EN 60721-3-5Yes; Class 5S3 incl. sand, dust; *

— Against mechanical environmental conditions acc. to EN 60721-3-5Yes; Class 5M2 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0)

— against mechanical environmental conditions in agriculture acc. to ISO 15003Yes; level 1 (Location LE) using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0)

Usage in industrial process technology

— Against chemically active substances acc. to EN 60654-4Yes; Class 3 (excluding trichlorethylene)

— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)

Remark

— Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04* The supplied plug covers must remain in place over the unused interfaces during operation!

Conformal coating

Coatings for printed circuit board assemblies acc. to EN 61086Yes; Class 2 for high reliability

Protection against fouling acc. to EN 60664-3Yes; Type 1 protection

Electronic equipment on rolling stock acc. to EN 50155Yes; Class PC2 protective coating acc. to EN 50155:2017

Military testing according to MIL-I-46058C, Amendment 7Yes; Discoloration of coating possible during service life

Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830AYes; Conformal coating, Class A

Dimensions

Width20 mm

Height73 mm

Depth58 mm

Weights

Weight, approx.50 g

Other

Note:for use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A, Online Support article 109736776

Accessories 2

Genuine accessories that can be used with the Siemens 6AG2132-6FD00-4CU0 motor and are supplied separately are listed below. Click a code to open the accessory page and see the other compatible motors.