Genel bilgiler
based on6ES7331-7NF10-0AB0
Product function
Isochronous modeYok
Yük gerilimi L+
Nominal değer (DC)24 V
Ters polarite korumasıVar
Giriş akımı
from load voltage L+ (without load), max.200 mA
from backplane bus 5 V DC, max.100 mA
Güç kaybı
Güç kaybı, tipik3 W
Analog girişler
Analog giriş sayısı8
permissible input voltage for voltage input (destruction limit), max.75 V; 35 V continuous, 75 V for maks. 1 s (mark to space ratio 1:20)
permissible input current for current input (destruction limit), max.40 mA
Giriş aralıkları
GerilimVar
CurrentVar
ThermocoupleYok
Resistance thermometerYok
ResistanceYok
Giriş aralıkları (nominal değerler), gerilim
0 … +10 VYok
1 V to 5 VVar
— Input resistance (1 V to 5 V)10 MΩ
1 V to 10 VYok
-1 V to +1 VYok
-10 V to +10 VVar
— Input resistance (-10 V to +10 V)10 MΩ
-2.5 V to +2.5 VYok
-250 mV to +250 mVYok
-5 V to +5 VVar
— Input resistance (-5 V to +5 V)10 MΩ
-50 mV to +50 mVYok
-500 mV to +500 mVYok
-80 mV to +80 mVYok
Input ranges (rated values), currents
0 … 20 mAVar
— Input resistance (0 to 20 mA)250 Ω
-20 mA to +20 mAVar
— Input resistance (-20 mA to +20 mA)250 Ω
-3.2 mA to +3.2 mAYok
4 mA to 20 mAVar
— Input resistance (4 mA to 20 mA)250 Ω
Input ranges (rated values), thermocouples
Type BYok
Type CYok
Type EYok
Type JYok
Type KYok
Type LYok
Type NYok
Type RYok
Type SYok
Type TYok
Type UYok
Type TXK/TXK(L) to GOSTYok
Input ranges (rated values), resistance thermometer
Cu 10Yok
Ni 100Yok
Ni 1000Yok
LG-Ni 1000Yok
Ni 120Yok
Ni 200Yok
Ni 500Yok
Pt 100Yok
Pt 1000Yok
Pt 200Yok
Pt 500Yok
Input ranges (rated values), resistors
0 to 150 ohmsYok
0 to 300 ohmsYok
0 to 600 ohmsYok
0 to 6000 ohmsYok
Kablo uzunluğu
Ekranlı, maks.200 m
Kanal başına entegrasyon/dönüşüm süresi ve çözünürlük
Aşım dahil çözünürlük (işaret biti dahil), maks.16 bit; Unipolar: 15/15/15/15 bit; bipolar: 15 bit + sign/15 bit + sign/15 bit + sign/15 bit + sign
Entegrasyon süresi, parametrelenebilirVar; 23 / 72 / 83 / 95 ms
Basic conversion time (ms)10 ms (4-channel mode); 95/83/72/23 ms (8-channel mode)
Interference voltage suppression for interference frequency f1 in Hz400 / 60 / 50 Hz, combinations of 400, 60, 50 Hz
Connection of signal encoders
for voltage measurementVar
for current measurement as 2-wire transducerVar; with external transmitter, current supply; possible with separate supply for transmitter
for current measurement as 4-wire transducerVar
Operational error limit in overall temperature range
Voltage, relative to input range, (+/-)0,1 %; @ 0... +60 °C; ±0,2% @ -25... +60 °C
Current, relative to input range, (+/-)0,1 %; @ 0... +60 °C; ±0,2% @ -25... +60 °C
Basic error limit (operational limit at 25 °C)
Voltage, relative to input range, (+/-)0,05 %
Current, relative to input range, (+/-)0,05 %
Interrupts/diagnostics/status information
Diagnostics functionVar; Parameterizable
Alarms
Diagnostic alarmVar; Parameterizable
Limit value alarmVar; Parameterizable all channels (end of cycle interrupt is also supported across modules)
Hardware interruptVar; Parameterizable, channels 0 to 7 (on exceeding limit value), end of cycle
Diagnoses
Diagnostic information readableVar
Tanılama gösterge LED’i
Group error SF (red)Var
Potential separation analog inputs
Kanallar arasıYok
Kanallar arası, grup başına2
between the channels and backplane busVar
between the channels and the power supply of the electronicsVar
Isolation
Isolation tested with500 V AC
Standartlar, onaylar, sertifikalar
CE işaretiVar
UL onayıVar; File E239877
RCM (eski adıyla C-TICK)Var
KC onayıVar
EAC (formerly Gost-R)Var
Railway application
EN 50121-4Yok
EN 50155Yok
Çalışma ortam sıcaklığı
min.-25 °C; = Tmin
maks.60 °C; = Tmax
Depolama/taşıma ortam sıcaklığı
min.-40 °C
maks.70 °C
Deniz seviyesine göre çalışma yüksekliği
Installation altitude above sea level, max.5.000 m
Ambient air temperature-barometric pressure-altitudeTmin... Tmax 1.140 hPa... 795 hPa (-1 000 m... +2.000 m) // Tmin... (Tmax - 10 K) 795 hPa... 658 hPa (+2.000 m... +3.500 m) // Tmin... (Tmax -20 K) 658 hPa... 540 hPa (+3.500 m... +5.000 m)
Bağıl nem
With condensation, tested in accordance with IEC 60068-2-38, max.100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Use in stationary industrial systems
— to biologically active substances according to EN 60721-3-3Var; Class 3B2 mold, fungus ve dry rot spores (with the exception of fauna); Class 3B3 talep üzerine
— to chemically active substances according to EN 60721-3-3Var; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to mechanically active substances according to EN 60721-3-3Var; Class 3S4 incl. sand, dust, *
Use on ships/at sea
— to biologically active substances according to EN 60721-3-6Var; Class 6B2 mold ve fungal spores (excluding fauna); Class 6B3 talep üzerine
— to chemically active substances according to EN 60721-3-6Var; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to mechanically active substances according to EN 60721-3-6Var; Class 6S3 incl. sand, dust; *
Usage in industrial process technology
— Against chemically active substances acc. to EN 60654-4Var; Class 3 (excluding trichlorethylene)
— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04Var; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) ve level LB3 (oil)
Remark
— Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04* The supplied plug covers must remain in place over the unused interfaces during operation!
Connection method
required front connector40-pin
Ölçüler
Genişlik40 mm
Yükseklik125 mm
Derinlik120 mm
Ağırlık
Ağırlık, yaklaşık272 g