Genel bilgiler
based on6ES7322-1FF01-0AA0
Load voltage L1
Rated value (AC)230 V; 120/230 V AC
permissible range, lower limit (AC)93 V
permissible range, upper limit (AC)264 V
permissible frequency range, lower limit47 Hz
permissible frequency range, upper limit63 Hz
Giriş akımı
from load voltage L1 (without load), max.2 mA
from backplane bus 5 V DC, max.100 mA
Güç kaybı
Güç kaybı, tipik8,6 W
Dijital çıkışlar
Dijital çıkış sayısı8
Short-circuit protectionVar; Fuse 8 A, 250 V; per group
required current for fuse shutdown, min.40 A
Response time, max.300 ms
Controlling a digital inputVar
Size of motor starters according to NEMA, max.5 NEMA compliant
Spare fuses8 A / quick response
Zero-crossing switchVar; Maks. 60 V
Çıkışların anahtarlama kapasitesi
Lamba yükünde, maks.50 W
Çıkış gerilimi
“1” sinyali için, min.L1 (-1.5 V)
for signal "1" (at max. current), min.L1 (-1.5 V)
for signal "1" (at min. current), min.L1 (-8.5 V)
Çıkış akımı
“1” sinyali için nominal değer2 A
for signal "1" permissible range for 0 to 40 °C, min.10 mA
for signal "1" permissible range for 0 to 40 °C, max.2 A
for signal "1" permissible range for 40 to 60 °C, min.10 mA
for signal "1" permissible range for 40 to 60 °C, max.1 A
for signal "1" minimum load current10 mA
for signal "1" permissible surge current, max.20 A; maks. 1 AC cycle
“0” sinyali için artık akım, maks.2 mA
Omik yükte çıkış gecikmesi
“0”dan “1”e, maks.1 AC cycle
“1”den “0”a, maks.1 AC cycle
Parallel switching of two outputs
for upratingYok
for redundant control of a loadVar
Anahtarlama frekansı
Omik yükte, maks.10 Hz
with inductive load, max.0,5 Hz
with inductive load (acc. to IEC 60947-5-1, AC15), max.0,5 Hz
Lamba yükünde, maks.1 Hz
horizontal installation
— 40 °C’ye kadar, maks.4 A
— up to 60 °C, max.2 A
— up to 70 °C, max.1,5 A
vertical installation
— 40 °C’ye kadar, maks.2 A
Kablo uzunluğu
Ekranlı, maks.1.000 m
Ekransız, maks.600 m
Interrupts/diagnostics/status information
AlarmsYok
Diagnostics functionVar; Fuse blown veya load voltage missing
Alarms
Diagnostic alarmYok
Diagnoses
Wire breakYok
Short-circuitYok
Fuse blownVar
Missing load voltageVar
Tanılama gösterge LED’i
Rated load voltage PWR (green)Var
Fuse OK FSG (green)Var
Group error SF (red)Var
Status indicator digital output (green)Var
Dijital çıkışlarda potansiyel ayrımı
Kanallar arasıVar
Kanallar arası, grup başına4
between the channels and backplane busVar; Optocoupler
Isolation
Isolation tested with1.500 V AC
Standartlar, onaylar, sertifikalar
CE işaretiVar
UL onayıVar; File E239877
RCM (eski adıyla C-TICK)Var
KC onayıVar
EAC (formerly Gost-R)Var
Railway application
EN 50155Var; T1 Category 1 Class A/B yatay mounting position
Çalışma ortam sıcaklığı
min.-40 °C
maks.70 °C; = Tmax; for use on railway vehicles according to EN 50155, the rated temperature range -25... +55 °C (T1) veya 60 °C @ UL/UL hazardous use applies
Depolama/taşıma ortam sıcaklığı
min.-40 °C
maks.70 °C
Deniz seviyesine göre çalışma yüksekliği
Installation altitude above sea level, max.2.000 m
Ambient air temperature-barometric pressure-altitudeTmin... Tmax 1.140 hPa... 795 hPa (-1 000 m... +2.000 m)
Bağıl nem
With condensation, tested in accordance with IEC 60068-2-38, max.100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Use in stationary industrial systems
— to biologically active substances according to EN 60721-3-3Var; Class 3B2 mold, fungus ve dry rot spores (with the exception of fauna); Class 3B3 talep üzerine
— to chemically active substances according to EN 60721-3-3Var; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to mechanically active substances according to EN 60721-3-3Var; Class 3S4 incl. sand, dust, *
Use on ships/at sea
— to biologically active substances according to EN 60721-3-6Var; Class 6B2 mold ve fungal spores (excluding fauna); Class 6B3 talep üzerine
— to chemically active substances according to EN 60721-3-6Var; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to mechanically active substances according to EN 60721-3-6Var; Class 6S3 incl. sand, dust; *
Usage in industrial process technology
— Against chemically active substances acc. to EN 60654-4Var; Class 3 (excluding trichlorethylene)
— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04Var; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) ve level LB3 (oil)
Remark
— Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04* The supplied plug covers must remain in place over the unused interfaces during operation!
Connection method
required front connector20-pin
Ölçüler
Genişlik40 mm
Yükseklik125 mm
Derinlik120 mm
Ağırlık
Ağırlık, yaklaşık275 g