Genel bilgiler
Ürün tipi tanımıF-PM-E 24 V DC/8 A PPM ST
based on6ES7136-6PA00-0BC0
usable BaseUnitsBU type C0
Color code for module-specific color-coded labelCC52
Product function
I&M dataVar; I&M0 to I&M3
Mühendislik aracı
STEP 7 TIA Portal configurable/integrated from versionsee entry ID: 109746275
Besleme gerilimi
Nominal değer (DC)24 V
İzin verilen aralık, alt sınır (DC)20,4 V
İzin verilen aralık, üst sınır (DC)28,8 V
Ters polarite korumasıVar
Giriş akımı
Akım tüketimi (nominal değer)75 mA; without load
Akım tüketimi, maks.21 mA; From the backplane bus
Çıkış gerilimi
Nominal değer (DC)24 V
Encoder supply
Number of outputs2
Short-circuit protectionVar; Electronic (response threshold 0,7 A to 2,1 A)
Çıkış akımı
up to 60 °C, max.0,3 A
24 V enkoder beslemesi
24 VVar; min. L+ (-1.5 V)
Short-circuit protectionVar
Output current, max.600 mA; Total current of all encoders
Power
Power consumption from the backplane bus70 mW
Güç kaybı
Güç kaybı, tipik5 W
Address space per module
Inputs7 bayt
Outputs5 bayt
Donanım yapılandırması
Automatic encodingVar
Electronic coding element type FVar
Dijital girişler
Dijital giriş sayısı2
Kaynak/çeken girişVar; P-reading
Input characteristic curve in accordance with IEC 61131, type 1Var
Giriş gerilimi
Type of input voltageDC
Nominal değer (DC)24 V
“0” sinyali için-30 to +5 V
“1” sinyali için+15 to +30 V
Giriş akımı
for signal "1", typ.3,7 mA
Standart girişler için
— ParametrelenebilirVar
— “0”dan “1”e, min.0,4 ms
— “0”dan “1”e, maks.20 ms
— at "1" to "0", min.0,4 ms
— at "1" to "0", max.20 ms
Teknolojik fonksiyonlar için
— ParametrelenebilirYok
Kablo uzunluğu
Ekranlı, maks.1.000 m
Ekransız, maks.500 m
Dijital çıkışlar
Dijital çıkış sayısı1
Digital outputs, parameterizableVar
Short-circuit protectionVar
Response threshold, typ.> 14,8 A
Open-circuit detectionVar
Response threshold, typ.8 mA
Overload protectionVar
Response threshold, typ.8,8 A
Endüktif kapatma geriliminin sınırlandırılmasımaks. 1,5 V
Çıkışların anahtarlama kapasitesi
Omik yükte, maks.8 A
Lamba yükünde, maks.100 W
Load resistance range
lower limit3 Ω
upper limit2.000 Ω
Çıkış gerilimi
“1” sinyali için, min.24 V; L+ (-0.5 V)
Çıkış akımı
“1” sinyali için nominal değer8 A
“0” sinyali için artık akım, maks.1,5 mA; PP-switching: maks. 1,5 mA; PM-switching: maks. 1 mA
Anahtarlama frekansı
Omik yükte, maks.10 Hz; Symmetrical
with inductive load, max.0,1 Hz; according to IEC 60947-5-1, DC-13, symmetrical
Lamba yükünde, maks.4 Hz; Symmetrical
Total current of the outputs
Current per channel, max.8 A; note derating data in the manual
Current per module, max.8 A; note derating data in the manual
horizontal installation
— 40 °C’ye kadar, maks.8 A; note derating data in the manual
— up to 50 °C, max.6 A; note derating data in the manual
— up to 60 °C, max.4 A; note derating data in the manual
— up to 70 °C, max.4 A; note derating information in the manual; yalnızca şununla: configured slots to the left ve right of the module
Kablo uzunluğu
Ekranlı, maks.1.000 m
Ekransız, maks.500 m
Interrupts/diagnostics/status information
Diagnostics functionVar; See Chapter "Alarms/diagnostic messages" in the manual
Substitute values connectableYok
Alarms
Diagnostic alarmVar
Hardware interruptYok
Tanılama gösterge LED’i
RUN LEDVar; green LED
ERROR LED’iVar; red LED
Monitoring of the supply voltage (PWR-LED)Var; green PWR LED
Channel status displayVar; green LED
for channel diagnosticsVar; red LED
for module diagnosticsVar; green/red DIAG LED
Potential separation channels
Kanallar arasıYok
between the channels and backplane busVar
between the channels and the power supply of the electronicsYok
Isolation
Isolation tested with707 V DC (type test)
Standartlar, onaylar, sertifikalar
Suitable for safety functionsVar
Ekolojik ayak izi
Çevresel ürün beyanıVar
Küresel ısınma potansiyeli
— Küresel ısınma potansiyeli (toplam) [CO₂ eşd.]88,3 kg
— Küresel ısınma potansiyeli (üretim sırasında) [CO₂ eşd.]13,1 kg
— Küresel ısınma potansiyeli (çalışma sırasında) [CO₂ eşd.]76,6 kg
— Küresel ısınma potansiyeli (ömür sonrası) [CO₂ eşd.]-1.37 kg
Highest safety class achievable in safety mode
Performance level according to ISO 13849-1PLe
SIL acc. to IEC 61508SIL 3
Probability of failure (for service life of 20 years and repair time of 100 hours)
— Low demand mode: PFDavg in accordance with SIL2< 2.00E-04
— Low demand mode: PFDavg in accordance with SIL3< 2.00E-05
— High demand/continuous mode: PFH in accordance with SIL2< 1.00E-08 1/h
— High demand/continuous mode: PFH in accordance with SIL3< 1.00E-09 1/h
Çalışma ortam sıcaklığı
Yatay montaj, min.-30 °C; = Tmin (incl. condensation/frost)
Yatay montaj, maks.60 °C; = Tmax; +70 °C with spacing modules (6AG1193-6BN00-7BA0) veya configured slots to the left ve right of the module
Dikey montaj, min.-30 °C; = Tmin
Dikey montaj, maks.50 °C; = Tmax
Deniz seviyesine göre çalışma yüksekliği
Installation altitude above sea level, max.4.000 m; restrictions for installation altitudes > 2.000 m, see ET 200SP system manual
Bağıl nem
With condensation, tested in accordance with IEC 60068-2-38, max.100 %; RH incl. condensation / frost (no commissioning in bedewed state), yatay installation
Coolants and lubricants
— Resistant to commercially available coolants and lubricantsVar; Incl. diesel ve oil droplets in the air
Use in stationary industrial systems
— to biologically active substances according to EN 60721-3-3Var; Class 3B2 mold, fungus ve dry rot spores (with the exception of fauna); Class 3B3 talep üzerine
— to chemically active substances according to EN 60721-3-3Var; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to mechanically active substances according to EN 60721-3-3Var; Class 3S4 incl. sand, dust, *
— Against mechanical environmental conditions acc. to EN 60721-3-3Var; Class 3M8 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0)
Use on ships/at sea
— to biologically active substances according to EN 60721-3-6Var; Class 6B2 mold, fungal ve dry rot spores (excluding fauna)
— to chemically active substances according to EN 60721-3-6Var; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to mechanically active substances according to EN 60721-3-6Var; Class 6S3 incl. sand, dust; *
— Against mechanical environmental conditions acc. to EN 60721-3-6Var; Class 6M4 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0)
Usage in industrial process technology
— Against chemically active substances acc. to EN 60654-4Var; Class 3 (excluding trichlorethylene)
— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04Var; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) ve level LB3 (oil)
Remark
— Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04* The supplied plug covers must remain in place over the unused interfaces during operation!
Conformal coating
Coatings for printed circuit board assemblies acc. to EN 61086Var; Class 2 for high reliability
Protection against fouling acc. to EN 60664-3Var; Type 1 protection
Military testing according to MIL-I-46058C, Amendment 7Var; Discoloration of coating possible during service life
Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830AVar; Conformal coating, Class A
Ölçüler
Genişlik20 mm
Yükseklik72 mm
Derinlik55 mm
Ağırlık
Ağırlık, yaklaşık70 g