General technical data
product brand nameSIRIUS
product designationSoft starter
integrated bypass contact systemVar
thyristorsVar
intrinsic device protectionYok
motor overload protectionYok
evaluation of thermistor motor protectionYok
external resetYok
adjustable current limitationYok
inside-delta circuitYok
product component motor brake outputYok
insulation voltage rated value600 V
degree of pollution3, acc. to IEC 60947-4-2
blocking voltage of the thyristor maximum1.600 V
reference code according to EN 61346-2Q
reference code according to DIN 40719 extended according to IEC 204-2 according to IEC 750G
Power Electronics
at 40 °C rated value45 A
at 50 °C rated value42 A
at 60 °C rated value39 A
— at standard circuit at 40 °C rated value11 kW
— at standard circuit at 40 °C rated value22 kW
yielded mechanical performance [hp] for 3-phase AC motor at 200/208 V at standard circuit at 50 °C rated value10 hp
operating frequency rated value50... 60 Hz
relative negative tolerance of the operating frequency-10 %
relative positive tolerance of the operating frequency10 %
operating voltage at standard circuit rated value200... 480 V
relative negative tolerance of the operating voltage at standard circuit-15 %
relative positive tolerance of the operating voltage at standard circuit10 %
minimum load [%]10 %
continuous operating current [% of Ie] at 40 °C115 %
power loss [W] at operational current at 40 °C during operation typical6 W
Control circuit/ Control
type of voltage of the control supply voltageAC/DC
control supply voltage frequency 1 rated value50 Hz
control supply voltage frequency 2 rated value60 Hz
relative negative tolerance of the control supply voltage frequency-10 %
relative positive tolerance of the control supply voltage frequency10 %
at 50 Hz rated value24 V
at 60 Hz rated value24 V
relative negative tolerance of the control supply voltage at AC at 50 Hz-20 %
relative positive tolerance of the control supply voltage at AC at 50 Hz20 %
relative negative tolerance of the control supply voltage at AC at 60 Hz-20 %
relative positive tolerance of the control supply voltage at AC at 60 Hz20 %
control supply voltage 1 at DC rated value24 V
relative negative tolerance of the control supply voltage at DC-20 %
relative positive tolerance of the control supply voltage at DC20 %
display version for fault signalred
Mechanical data
size of engine control deviceS2
width55 mm
height160 mm
depth170 mm
fastening methodscrew ve snap-on mounting
mounting positionWith dikey mounting surface +/-10° rotatable, with dikey mounting surface +/- 10° tiltable to the front ve back
upwards60 mm
at the side30 mm
downwards40 mm
wire length maximum300 m
number of poles for main current circuit3
Connections/ Terminals
for main current circuitscrew-type terminals
for auxiliary and control circuitscrew-type terminals
number of NC contacts for auxiliary contacts0
number of NO contacts for auxiliary contacts1
number of CO contacts for auxiliary contacts0
solid2x (1,5... 16 mm²)
finely stranded with core end processing1,5... 25 mm²
stranded1,5... 35 mm²
solid2x (1,5... 16 mm²)
finely stranded with core end processing1,5... 25 mm²
stranded1,5... 35 mm²
solid2x (1,5... 16 mm²)
finely stranded with core end processing2x (1,5... 16 mm²)
stranded2x (1,5... 25 mm²)
using the back clamping point16... 2
using the front clamping point18... 2
using both clamping points2x (16... 2)
solid2x (0,5... 2,5 mm²)
finely stranded with core end processing2x (0,5... 1,5 mm²)
for auxiliary contacts2x (20... 14)
for auxiliary contacts finely stranded with core end processing2x (20... 16)
Ambient conditions
installation altitude at height above sea level5.000 m
during transport according to IEC 607212K2, 2C1, 2S1, 2M2 (maks. fall height 0,3 m)
during storage according to IEC 607211K6 (only occasional condensation), 1C2 (no salt mist), 1S2 (sand must not get inside the devices), 1M4
during operation according to IEC 607213K6 (no formation of ice, no condensation), 3C3 (no salt mist), 3S2 (sand must not get into the devices), 3M6
during operation-25... +60 °C
during storage-40... +80 °C
derating temperature40 °C
protection class IP on the front according to IEC 60529IP20
touch protection on the front according to IEC 60529finger-safe, for dikey contact from the front
UL/CSA ratings
— at standard circuit at 50 °C rated value15 hp
— at standard circuit at 50 °C rated value30 hp
contact rating of auxiliary contacts according to ULB300 / R300
Approvals Certificates
global warming potential [CO2 eq] / during manufacturing22 kg
global warming potential [CO2 eq] / during sales0,289 kg
global warming potential [CO2 eq] / during operation140 kg
global warming potential [CO2 eq] / after end of life-3.2 kg
global warming potential [CO2 eq] / total159 kg