How can I get a price quote for Siemens 6ES7313-6CG04-0AB0?

You can request a fast quote for Siemens 6ES7313-6CG04-0AB0 from Yılsa Engineering. Reference part number CEY-937FC780AE92. Submit a request via the contact or quote form and our team replies shortly with price and lead time.

Is Siemens 6ES7313-6CG04-0AB0 in stock and what is the delivery time?

Yılsa Engineering sources products as genuine items through a wide supplier network. Typical lead time is 7-21 days, with 1-3 business days domestic transit in Türkiye. Current status is confirmed in the quote.

Is Siemens 6ES7313-6CG04-0AB0 genuine and new?

Yes. This Siemens product is supplied genuine and brand-new, sold with invoice under Yılsa Engineering assurance.

How do I get the datasheet and technical specs for Siemens 6ES7313-6CG04-0AB0?

Key technical specifications are listed on the product page. For the full datasheet, dimensions and compatibility, simply contact Yılsa Engineering.

Click to zoom

Photo may not represent actual item. Refer to name and product specs for all details.

Siemens 6ES7313-6CG04-0AB0

***spare part*** SIMATIC S7-300, CPU 313C-2 DP compact CPU with MPI, 16 DI/16 DO, 3 high-speed counters (30 kHz), integrated DP interface, integrated power supply 24 V DC, work memory 128 KB, front connector (1x 40-pole) and Micro Memory Card required

SiemensMFR # 6ES7313-6CG04-0AB0SKU # CEY-937FC780AE92

Product type designationCPU 313C-2

HW functional status01

Firmware versionV3.3

Rated value (DC)24 V

permissible range, lower limit (DC)19.2 V

permissible range, upper limit (DC)28.8 V

Have questions?Chat on WhatsApp

About This Product

Siemens 6ES7313-6CG04-0AB0

Genuine, certified Siemens product
Fast sourcing through a worldwide supply network
Product selection and compatibility support from our technical team
Equivalent and alternative product suggestions
Quotation and lead time tailored to your request

Specifications

General information

Product type designationCPU 313C-2

HW functional status01

Firmware versionV3.3

Engineering with

Programming packageSTEP 7 V5.5 + SP1 or higher or STEP 7 V5.3 + SP2 or higher with HSP 203

Supply voltage

Rated value (DC)24 V

permissible range, lower limit (DC)19.2 V

permissible range, upper limit (DC)28.8 V

external protection for power supply lines (recommendation)Miniature circuit breaker, type C; min. 2 A; miniature circuit breaker type B, min. 4 A

Mains buffering

Mains/voltage failure stored energy time5 ms

Repeat rate, min.1 s

Digital inputs

— Rated value (DC)24 V

— Reverse polarity protectionYes

Digital outputs

— Rated value (DC)24 V

— Reverse polarity protectionNo

Input current

Current consumption (rated value)800 mA

Current consumption (in no-load operation), typ.110 mA

Inrush current, typ.5 A

I²t0.7 A²·s

Digital inputs

from load voltage L+ (without load), max.80 mA

Digital outputs

from load voltage L+, max.50 mA

Power loss

Power loss, typ.9 W

Work memory

integrated128 kbyte

expandableNo

Load memory

Plug-in (MMC)Yes

Plug-in (MMC), max.8 Mbyte

Data management on MMC (after last programming), min.10 a

Backup

presentYes; Guaranteed by MMC (maintenance-free)

without batteryYes; Program and data

CPU processing times

for bit operations, typ.0.07 µs

for word operations, typ.0.15 µs

for fixed point arithmetic, typ.0.2 µs

for floating point arithmetic, typ.0.72 µs

CPU-blocks

Number of elements (total)1 024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.

Number, max.1 024; Number range: 1 to 16000

Size, max.64 kbyte

Number, max.1 024; Number range: 0 to 7999

Size, max.64 kbyte

Number, max.1 024; Number range: 0 to 7999

Size, max.64 kbyte

Number, max.see instruction list

Size, max.64 kbyte

Number of free cycle OBs1; OB 1

Number of time alarm OBs1; OB 10

Number of delay alarm OBs2; OB 20, 21

Number of cyclic interrupt OBs4; OB 32, 33, 34, 35

Number of process alarm OBs1; OB 40

Number of DPV1 alarm OBs3; OB 55, 56, 57

Number of startup OBs1; OB 100

Number of asynchronous error OBs5; OB 80, 82, 85, 86, 87

Number of synchronous error OBs2; OB 121, 122

Nesting depth

per priority class16

additional within an error OB4

S7 counter

Number256

Retentivity

— adjustableYes

— presetZ 0 to Z 7

Counting range

— lower limit0

— upper limit999

IEC counter

presentYes

TypeSFB

NumberUnlimited (limited only by RAM capacity)

S7 timer

Number256

Retentivity

— adjustableYes

— presetNo retentivity

Time range

— lower limit10 ms

— upper limit9 990 s

IEC timer

presentYes

TypeSFB

NumberUnlimited (limited only by RAM capacity)

Data areas and their retentivity

Retentive data area (incl. timers, counters, flags), max.64 kbyte

Flag

Size, max.256 byte

Retentivity availableYes; MB 0 to MB 255

Retentivity presetMB 0 to MB 15

Number of clock memories8; 1 memory byte

Data blocks

Retentivity adjustableYes; via non-retain property on DB

Retentivity presetYes

Local data

per priority class, max.32 kbyte; Max. 2048 bytes per block

I/O address area

Inputs2 048 byte

Outputs2 048 byte

of which distributed

— Inputs2 030 byte

— Outputs2 030 byte

Process image

Inputs2 048 byte

Outputs2 048 byte

Inputs, adjustable2 048 byte

Outputs, adjustable2 048 byte

Inputs, default128 byte

Outputs, default128 byte

Digital channels

Inputs16 256

— of which central1 008

Outputs16 256

— of which central1 008

Analog channels

Inputs1 015

— of which central248

Outputs1 015

— of which central248

Hardware configuration

Number of expansion units, max.3

Number of DP masters

integrated1

via CP4

Number of operable FMs and CPs (recommended)

FM8

CP, PtP8

CP, LAN6

Rack

Racks, max.4

Modules per rack, max.8; In rack 3 max. 7

Clock

Hardware clock (real-time)Yes

retentive and synchronizableYes

Backup time6 wk; At 40 °C ambient temperature

Deviation per day, max.10 s; Typ.: 2 s

Behavior of the clock following POWER-ONClock continues running after POWER OFF

Behavior of the clock following expiry of backup periodthe clock continues at the time of day it had when power was switched off

Operating hours counter

Number1

Number/Number range0

Range of values0 to 2^31 hours (when using SFC 101)

Granularity1 h

retentiveYes; Must be restarted at each restart

Clock synchronization

supportedYes

to MPI, masterYes

on MPI, deviceYes

to DP, masterYes; With DP slave only slave clock

on DP, deviceYes

in AS, masterYes

in AS, deviceNo

Digital inputs

Number of digital inputs16

of which inputs usable for technological functions12

integrated channels (DI)16

Input characteristic curve in accordance with IEC 61131, type 1Yes

horizontal installation

— up to 40 °C, max.16

— up to 60 °C, max.8

vertical installation

— up to 40 °C, max.8

Input voltage

Rated value (DC)24 V

for signal "0"-3 to +5V

for signal "1"+15 to +30 V

Input current

for signal "1", typ.8 mA

for standard inputs

— parameterizableYes; 0.1 / 0.3 / 3 / 15 ms (You can reconfigure the input delay of the standard inputs during program runtime. Please note that under certain circumstances your newly set filter time may not be effective until the next filter cycle.)

— Rated value3 ms

for technological functions

— at "0" to "1", max.16 µs; Minimum pulse width/minimum pause between pulses at maximum counting frequency

Cable length

shielded, max.1 000 m; 100 m for technological functions

unshielded, max.600 m; for technological functions: No

for technological functions

— shielded, max.100 m; at maximum count frequency

— unshielded, max.not allowed

Digital outputs

Number of digital outputs16

of which high-speed outputs4; Notice: You cannot connect the fast outputs of your CPU in parallel

integrated channels (DO)16

Short-circuit protectionYes; Clocked electronically

Response threshold, typ.1 A

Limitation of inductive shutdown voltage toL+ (-48 V)

Controlling a digital inputYes

Switching capacity of the outputs

on lamp load, max.5 W

Load resistance range

lower limit48 Ω

upper limit4 kΩ

Output voltage

for signal "1", min.L+ (-0.8 V)

Output current

for signal "1" rated value500 mA

for signal "1" permissible range, min.5 mA

for signal "1" permissible range, max.0.6 A

for signal "1" minimum load current5 mA

for signal "0" residual current, max.0.5 mA

Parallel switching of two outputs

for upratingNo

for redundant control of a loadYes

Switching frequency

with resistive load, max.100 Hz

with inductive load, max.0.5 Hz

on lamp load, max.100 Hz

of the pulse outputs, with resistive load, max.2.5 kHz

horizontal installation

— up to 40 °C, max.3 A

— up to 60 °C, max.2 A

vertical installation

— up to 40 °C, max.2 A

Cable length

shielded, max.1 000 m

unshielded, max.600 m

Analog inputs

Number of analog inputs0

integrated channels (AI)0

Analog outputs

integrated channels (AO)0

Connectable encoders

2-wire sensorYes

— permissible quiescent current (2-wire sensor), max.1.5 mA

Interfaces

Number of PROFINET interfaces0

Number of RS 485 interfaces2; MPI and PROFIBUS DP

Number of RS 422 interfaces0

1. Interface

Interface typeIntegrated RS 485 interface

IsolatedNo

Interface types

RS 485Yes

Output current of the interface, max.200 mA

Protocols

MPIYes

PROFIBUS DP masterNo

PROFIBUS DP deviceNo

Point-to-point connectionNo

MPI

Transmission rate, max.187.5 kbit/s

Services

— PG/OP communicationYes

— RoutingYes

— Global data communicationYes

— S7 basic communicationYes

— S7 communicationYes; Only server, configured on one side

— S7 communication, as clientNo; but via CP and loadable FB

— S7 communication, as serverYes

2. Interface

Interface typeIntegrated RS 485 interface

IsolatedYes

Interface types

RS 485Yes

Output current of the interface, max.200 mA

Protocols

MPINo

PROFINET IO ControllerNo

PROFINET IO DeviceNo

PROFINET CBANo

PROFIBUS DP masterYes

PROFIBUS DP deviceYes

PROFIBUS DP master

Transmission rate, max.12 Mbit/s

max. number of DP devices124

Services

— PG/OP communicationYes

— RoutingYes

— Global data communicationNo

— S7 basic communicationYes; I blocks only

— S7 communicationYes; Yes (only server; connection configured at one end)

— S7 communication, as clientNo

— S7 communication, as serverYes

— EquidistanceYes

— Isochronous modeNo

— SYNC/FREEZEYes

— activation/deactivation of DP devicesYes

— max. number of DP devices that can be activated/deactivated at the same time8

— Direct data exchange (slave-to-slave communication)Yes; as subscriber

— DPV1Yes

Address area

— Inputs, max.2 kbyte

— Outputs, max.2 kbyte

User data per DP device

— Inputs, max.244 byte

— Outputs, max.244 byte

PROFIBUS DP device

Transmission rate, max.12 Mbit/s

automatic baud rate searchYes; only with passive interface

Address area, max.32

User data per address area, max.32 byte

Services

— PG/OP communicationYes

— RoutingYes; Only with active interface

— Global data communicationNo

— S7 basic communicationNo

— S7 communicationYes; Yes (only server; connection configured at one end)

— S7 communication, as clientNo

— S7 communication, as serverYes

— Direct data exchange (slave-to-slave communication)Yes

— DPV1No

Transfer memory

— Inputs244 byte

— Outputs244 byte

Protocols

PROFIsafeNo

Communication functions

PG/OP communicationYes

Data record routingYes

Global data communication

supportedYes

Number of GD loops, max.8

Number of GD packets, max.8

Number of GD packets, transmitter, max.8

Number of GD packets, receiver, max.8

Size of GD packets, max.22 byte

Size of GD packet (of which consistent), max.22 byte

S7 basic communication

supportedYes

User data per job, max.76 byte

User data per job (of which consistent), max.76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)

S7 communication

supportedYes

as serverYes

as clientYes; Via CP and loadable FB

User data per job, max.180 kbyte; With PUT/GET

User data per job (of which consistent), max.240 byte; as server

S5 compatible communication

supportedYes; via CP and loadable FC

Number of connections

overall8

usable for PG communication7

— reserved for PG communication1

— adjustable for PG communication, min.1

— adjustable for PG communication, max.7

usable for OP communication7

— reserved for OP communication1

— adjustable for OP communication, min.1

— adjustable for OP communication, max.7

usable for S7 basic communication4

— reserved for S7 basic communication0

— adjustable for S7 basic communication, min.0

— adjustable for S7 basic communication, max.4

usable for routing4; max.

S7 message functions

Number of login stations for message functions, max.8; Depending on the configured connections for PG/OP and S7 basic communication

Process diagnostic messagesYes

simultaneously active Alarm_S blocks, max.300

Test commissioning functions

Status blockYes; Up to 2 simultaneously

Single stepYes

Number of breakpoints4

Status/control

Status/control variableYes

VariablesInputs, outputs, memory bits, DB, times, counters

Number of variables, max.30

— of which status variables, max.30

— of which control variables, max.14

Forcing

ForcingYes

Forcing, variablesInputs, outputs

Number of variables, max.10

Diagnostic buffer

presentYes

Number of entries, max.500

— adjustableNo

— of which powerfail-proof100; Only the last 100 entries are retained

Number of entries readable in RUN, max.499

— can be setYes; From 10 to 499

— preset10

Service data

Can be read outYes

Diagnostics indication LED

Status indicator digital input (green)Yes

Status indicator digital output (green)Yes

Integrated Functions

Number of counters3; See "Technological Functions" manual

Counting frequency, max.30 kHz

Frequency measurementYes

Number of frequency meters3; up to 30 kHz (see "Technological Functions" manual)

controlled positioningNo

integrated function blocks (closed-loop control)Yes; PID controller (see "Technological Functions" manual)

PID controllerYes

Number of pulse outputs3; Pulse width modulation up to 2.5 kHz (see "Technological Functions" Manual)

Limit frequency (pulse)2.5 kHz

Potential separation digital inputs

Potential separation digital inputsYes

between the channelsNo

between the channels and backplane busYes

Potential separation digital outputs

Potential separation digital outputsYes

between the channelsYes

between the channels, in groups of8

between the channels and backplane busYes

Isolation

Isolation tested with600 V DC

Ambient temperature during operation

min.0 °C

max.60 °C

Configuration software

STEP 7Yes; STEP 7 V5.5 + SP1 or higher or STEP 7 V5.3 + SP2 or higher with HSP 203

STEP 7 LiteNo

Programming

Command setsee instruction list

Nesting levels8

System functions (SFC)see instruction list

System function blocks (SFB)see instruction list

Programming language

— LADYes

— FBDYes

— STLYes

— SCLYes

— CFCYes

— GRAPHYes

— HiGraph®Yes

Know-how protection

User program protection/password protectionYes

Block encryptionYes; With S7 block Privacy

Dimensions

Width80 mm

Height125 mm

Depth130 mm

Weights

Weight, approx.500 g

Accessories 7

Genuine accessories that can be used with the Siemens 6ES7313-6CG04-0AB0 motor and are supplied separately are listed below. Click a code to open the accessory page and see the other compatible motors.

Part no	Description	Compatible motors
6ES7953-8LF31-0AA0	Aksesuar · Memory card
6ES7953-8LG31-0AA0	Aksesuar · Memory card
6ES7953-8LJ31-0AA0	Aksesuar · Memory card
6ES7953-8LL31-0AA0	Aksesuar · Memory card
6ES7953-8LP31-0AA0	Aksesuar · Memory card
9LF1110-6DA13-2AB1	Servis · Service Card
9TF6276-2XA11-1AL4	Servis