How can I get a price quote for Siemens 6ES7146-6FF00-0BB0?

You can request a fast quote for Siemens 6ES7146-6FF00-0BB0 from Yılsa Engineering. Reference part number YLSIX3TPWUHVJXR. Submit a request via the contact or quote form and our team replies shortly with price and lead time.

Is Siemens 6ES7146-6FF00-0BB0 in stock and what is the delivery time?

Yılsa Engineering sources products as genuine items through a wide supplier network. Typical lead time is 7-21 days, with 1-3 business days domestic transit in Türkiye. Current status is confirmed in the quote.

Is Siemens 6ES7146-6FF00-0BB0 genuine and new?

Yes. This Siemens product is supplied genuine and brand-new, sold with invoice under Yılsa Engineering assurance.

How do I get the datasheet and technical specs for Siemens 6ES7146-6FF00-0BB0?

Key technical specifications are listed on the product page. For the full datasheet, dimensions and compatibility, simply contact Yılsa Engineering.

Click to zoom

Photo may not represent actual item. Refer to name and product specs for all details.

Siemens 6ES7146-6FF00-0BB0

SIMATIC ET 200eco PN, F-DI 4x, F-DQ 2x 2 A PM, DIQ 4x, CM 1x IO-Link, M12-L, PROFIsafe up to PL e (ISO 13849) / SIL 3 (IEC 61508), degree of protection IP65/67 and IP69K, including eCoding plug-in connector

SiemensMFR # 6ES7146-6FF00-0BB0SKU # YLSIX3TPWUHVJXR

HW functional statusFS01

Firmware versionV1.1.x

FW update possibleYes

Vendor identification (VendorID)002AH

Device identifier (DeviceID)0306H

I&M dataYes

Have questions?Chat on WhatsApp

About This Product

Siemens 6ES7146-6FF00-0BB0

Genuine, certified Siemens product
Fast sourcing through a worldwide supply network
Product selection and compatibility support from our technical team
Equivalent and alternative product suggestions
Quotation and lead time tailored to your request

Specifications

General information

HW functional statusFS01

Firmware versionV1.1.x

FW update possibleYes

Vendor identification (VendorID)002AH

Device identifier (DeviceID)0306H

Product function

I&M dataYes

Isochronous modeNo

IRTNo; module will participate within an IRT topology

Fast startupNo

Prioritized startupNo

Engineering with

STEP 7 TIA Portal configurable/integrated from versionSTEP 7 V20 or higher with HSP0468

PROFINET from GSD version/GSD revisionGSDML V2.4.x

Operating mode

DIYes

CounterNo

DQYes

MSINo

MSONo

Supply voltage

Rated value (DC)24 V

Reverse polarity protectionYes

power supply according to NEC Class 2 requiredNo

Load voltage 1L+

Rated value (DC)24 V

permissible range, lower limit (DC)20.4 V

permissible range, upper limit (DC)28.8 V

Reverse polarity protectionYes; Against destruction; encoder power supply outputs applied with reversed polarity

Load voltage 2L+

Rated value (DC)24 V

permissible range, lower limit (DC)20.4 V

permissible range, upper limit (DC)28.8 V

Reverse polarity protectionYes; against destruction

Input current

Current consumption (rated value)100 mA 1L+ without load; 45 mA 2L+ without load

from load voltage 1L+ (unswitched voltage)12 A; Maximum value

from load voltage 2L+, max.12 A; Maximum value

Encoder supply

Number of outputs6; Us0, Us1, Vs0 - Vs3

24 V encoder supply

Short-circuit protectionYes; per channel, electronic

Output current, max.0.5 A

Actuator supply

Number of outputs3; Us2 - Us4

Short-circuit protectionYes; per channel, electronic

Output current

nominal1 A

Power loss

Power loss, typ.12 W

Address space per module

Inputs46 byte

Outputs39 byte

Submodules

Number of configurable submodules, max.3

Digital inputs

Number of digital inputs4 single-channel F-DI (SIL2) parameterizable as 2 two-channel (SIL3); 4 parameterizable as DIQ

Digital inputs, parameterizableYes

Sourcing/sinking inputP-reading

Input characteristic curve in accordance with IEC 61131, type 1Yes; F-DI

Input characteristic curve in accordance with IEC 61131, type 3Yes; DIQ

all mounting positions

— up to 60 °C, max.8

Input voltage

Rated value (DC)24 V

for signal "0"-3 to +5V

for signal "1"+15 to +30 V F-DI; +11 to +30 V DIQ

Input current

for signal "1", typ.3 to 6 mA F-DI; 2.5 mA DIQ

for standard inputs

— parameterizableYes; 0.8 / 1.6 / 3.2 / 6.4 / 12.8 ms F-DI; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms DIQ

Cable length

unshielded, max.30 m

Digital outputs

Number of digital outputs7; 2 F-DQ; 1 parameterizable F-DQ or IO-LINK Class B (with or without safety-shutdown); 4 parameterizable as DIQ

in groups of3 F-DQ (2L+); 4 DIQ (1L+)

Short-circuit protectionYes; per channel, electronic

Response threshold, typ.10 A F-DQ; 1 A DIQ

Limitation of inductive shutdown voltage toTyp. -74 V (typ. -26 V P-switch; typ. +48 V M-switch) F-DQ; Typ. 1L+ (-70 V) DIQ

Controlling a digital inputNo F-DQ; Yes DIQ

Switching capacity of the outputs

with resistive load, max.2 A F-DQ; 0.5 A DIQ

with inductive load, max.2 A F-DQ; 0.5 A DIQ

on lamp load, max.10 W F-DQ; 5 W DIQ

Load resistance range

lower limit12 Ohm F-DQ; 48 Ohm DIQ

upper limit2 kOhm F-DQ; 4 kOhm DIQ

Output voltage

for signal "1", min.2L+ (-2 V) F-DQ (2L+ (-1.5 V) P-switch; 0.5 V M-switch); 1L+ (-0.8 V) DIQ

Output current

for signal "1" rated value2 A F-DQ; 0.5 A DIQ

for signal "0" residual current, max.0.5 mA F-DQ; 0.1 mA DIQ

Output delay with resistive load

"0" to "1", max.100 µs

"1" to "0", max.100 µs; F-DQ; 150 µs DIQ

Parallel switching of two outputs

for upratingNo

for redundant control of a loadNo F-DQ; Yes DIQ

Switching frequency

with resistive load, max.30 Hz F-DQ; 100 Hz DIQ

with inductive load, max.0.1 Hz F-DQ; 0.5 Hz DIQ

on lamp load, max.30 Hz F-DQ; 100 Hz DIQ

Cable length

unshielded, max.30 m; 10 m F-DQ in hardware revision FS-01 for burner applications related to EN 298

Connectable encoders

2-wire sensorNo F-DI; Yes DIQ

— permissible quiescent current (2-wire sensor), max.0.5 mA F-DI; 1.5 mA DIQ

IO-Link

Number of ports1

IO-Link protocol 1.0Yes

IO-Link protocol 1.1Yes

Transmission rate4.8 kBd (COM1); 38.4 kBd (COM2)

Cycle time, min.2 ms

Size of process data, input per port33 byte

Size of process data, input per module33 byte

Size of process data, output per port32 byte

Size of process data, output per module32 byte

Memory size for device parameter2 kbyte

Master backupPossible with function block IO_LINK_MASTER

Configuration without S7-PCTPossible; autostart/manual function

Cable length unshielded, max.20 m

Connection of IO-Link devices

Port type AYes; via 3-core cable

Port type BYes; additional device supply: max. 2 A; also available with integrated Safety Shutdown via F-DQ 2

Interfaces

Transmission procedure100BASE-TX

Number of PROFINET interfaces1

1. Interface

Interface typePROFINET with 100 Mbit/s full duplex (100BASE-TX)

Interface types

M12 portYes; 2x M12, 4-pin, D-coded

Number of ports2

integrated switchYes

Protocols

PROFINET IO DeviceYes

Open IE communicationYes

Services

— IRTNo; module will participate within an IRT topology

— Prioritized startupNo

— Shared deviceYes

— Number of IO Controllers with shared device, max.2

M12 port

AutonegotiationYes

AutocrossingYes

Transmission rate, max.100 Mbit/s

Protocols

Supports protocol for PROFINET IOYes

PROFIsafeYes

EtherNet/IPNo

Modbus TCPNo

Redundancy mode

PROFINET system redundancy (S2)Yes

PROFINET system redundancy (R1)No

H-Sync forwardingNo

Media redundancy

— MRPYes

— MRPDNo

Open IE communication

TCP/IPNo

SNMPYes

DCPYes

LLDPYes

pingYes

ARPYes

Interrupts/diagnostics/status information

Substitute values connectableYes

Alarms

Diagnostic alarmYes; Parameterizable

Maintenance interruptYes; Parameterizable

Hardware interruptYes; Parameterizable

Diagnoses

Diagnostic information readableYes

Monitoring the supply voltageYes

— ParameterizableYes

Wire breakYes; DI, input current < 0.3 mA, per channel

Wire-break in actuator cableYes

short-circuitYes; F-DI, F-DQ, DIQ as output, encoder supply

Diagnostics indication LED

RUN LEDYes; green LED

ERROR LEDYes; red LED

MAINT LEDYes; Yellow LED

Monitoring of the supply voltage (PWR-LED)Yes; green LED

NS LEDNo

MS LEDNo

IO LEDYes; red/green/yellow LEDs

Channel status displayYes; green LED

for channel diagnosticsYes; red LED

For load voltage monitoringYes; green LED

Connection display LINK TX/RXYes; green LED, only link

Potential separation

between the load voltagesYes

between Ethernet and electronicsYes

Potential separation channels

between the channelsYes

between the channels and the power supply of the electronics4 F-DI / 4 DIQ / 1 IO-LINK are non-isolated and 3 F-DQ are isolated from supply voltage 1L+

tested with

24 V DC circuits707 V DC (type test)

Test voltage for interface, rms value [Vrms]1 500 V; According to IEEE 802.3

Degree and class of protection

IP degree of protectionIP65/67/69K

Standards, approvals, certificates

Suitable for safety-related tripping of standard modulesNo

Highest safety class achievable in safety mode

Performance level according to ISO 13849-1PLd (F-DI single-channel, F-DQ with dark test disabled), PLe (F-DI two-channel, F-DQ with dark test enabled)

Category according to ISO 13849-1Cat. 3 (F-DI single-channel, F-DQ with dark test disabled), Cat. 4 (F-DI two-channel, F-DQ with dark test enabled)

SIL acc. to IEC 61508SIL 2 (F-DI single-channel, F-DQ with dark test disabled), SIL 3 (F-DI two-channel, F-DQ with dark test enabled)

Probability of failure (for service life of 20 years and repair time of 100 hours)

— Low demand mode: PFDavg in accordance with SIL2< 8.00E-05 F-DI; < 3.00E-04 F-DQ for altitude <= 5 000 m

— Low demand mode: PFDavg in accordance with SIL3< 7.00E-05 F-DI; < 8.00E-05 F-DQ for altitude <= 5 000 m

— High demand/continuous mode: PFH in accordance with SIL2< 1.00E-09 1/h F-DI; < 5.00E-09 1/h F-DQ for altitude <= 5 000 m

— High demand/continuous mode: PFH in accordance with SIL3< 6.00E-10 1/h F-DI; < 4.00E-09 1/h F-DQ for altitude <= 5 000 m

Use in hazardous areas

Explosion protection category for gasATEX, UKEX, IECEx, CCCEx for Zone 2

Explosion protection category for dustATEX, UKEX, IECEx, CCCEx for Zone 22

Security

signed firmware updateYes