How can I get a price quote for Siemens 6ES7138-7FN00-0AB0?

You can request a fast quote for Siemens 6ES7138-7FN00-0AB0 from Yılsa Engineering. Reference part number CEY-55221B14EF6F. Submit a request via the contact or quote form and our team replies shortly with price and lead time.

Is Siemens 6ES7138-7FN00-0AB0 in stock and what is the delivery time?

Yılsa Engineering sources products as genuine items through a wide supplier network. Typical lead time is 7-21 days, with 1-3 business days domestic transit in Türkiye. Current status is confirmed in the quote.

Is Siemens 6ES7138-7FN00-0AB0 genuine and new?

Yes. This Siemens product is supplied genuine and brand-new, sold with invoice under Yılsa Engineering assurance.

How do I get the datasheet and technical specs for Siemens 6ES7138-7FN00-0AB0?

Key technical specifications are listed on the product page. For the full datasheet, dimensions and compatibility, simply contact Yılsa Engineering.

Click to zoom

Photo may not represent actual item. Refer to name and product specs for all details.

Siemens 6ES7138-7FN00-0AB0

SIMATIC, fail-safe electronic module for ET200iSP, 8 F-DI NAMUR Ex I, up to category 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849), Ex ib (ia Ga) IIC T4 Gb, Ex ib [ia IIIC Da] IIC T4 Gb, Ex ib [ia] I Mb

SiemensMFR # 6ES7138-7FN00-0AB0SKU # CEY-55221B14EF6F

Product type designation8F-DI ExNAMUR

Rack mountingNo

Front mountingYes

Rail mountingYes

Wall mounting/direct mountingYes

Type of supply voltageDC

Have questions?Chat on WhatsApp

About This Product

Siemens 6ES7138-7FN00-0AB0

Genuine, certified Siemens product
Fast sourcing through a worldwide supply network
Product selection and compatibility support from our technical team
Equivalent and alternative product suggestions
Quotation and lead time tailored to your request

Specifications

General information

Product type designation8F-DI ExNAMUR

Installation type/mounting

Rack mountingNo

Front mountingYes

Rail mountingYes

Wall mounting/direct mountingYes

Supply voltage

Type of supply voltageDC

Input current

Current consumption, typ.145 mA

from supply voltage L+, max.150 mA; int. Powerbus

Encoder supply

Number of outputs8

Output voltage (DC)8 V

Power loss

Power loss, typ.1.4 W

Address space per module

Inputs6 byte

Outputs4 byte

Hardware configuration

Fieldbus connection via separate transceiverYes

Digital inputs

Number of digital inputs8

Input voltage

Type of input voltageDC

Input current

for signal "0", max. (permissible quiescent current)1.2 mA

for signal "1", min.2.1 mA

for signal "1", typ.9.5 mA

Input delay (for rated value of input voltage)

Delay time for signal change, min.0.7 ms

Delay time for signal change, max.16 ms

for standard inputs

— at "0" to "1", min.0.7 ms

— at "0" to "1", max.16 ms; Parameterizable

— at "1" to "0", min.0.7 ms

— at "1" to "0", max.16 ms; Parameterizable

Cable length

shielded, max.500 m

unshielded, max.200 m

Encoder

Number of connectable encoders, max.8

Connectable encoders

NAMUR encoderYes

Interfaces

Number of PROFINET interfaces0

Number of RS 485 interfaces0

Protocols

Supports protocol for PROFINET IONo

PROFIBUSNo

Interrupts/diagnostics/status information

Diagnostics functionYes

Alarms

Diagnostic alarmYes; Parameterizable

Hardware interruptNo

Diagnoses

Diagnostic information readableYes

Wire breakYes; NAMUR encoders or single contact with 10 kOhm parallel resistor

short-circuitYes; R load < 150 ohms with NAMUR sensor/sensor and NAMUR changeover contact/sensor to DIN 19234

Diagnostics indication LED

Group error SF (red)Yes

Potential separation digital inputs

between the channelsNo

between the channels and backplane busYes

Permissible potential difference

between different circuits60 V DC/30 V AC

Isolation

Isolation tested with350 V AC/1 min between the shield and backplane bus connection 350 V AC/1 min between the shield and I/O 2830 V AC/1 min between backplane bus connection and I/O

Degree and class of protection

IP degree of protectionIP30

Standards, approvals, certificates

CE markYes

Suitable for safety functionsYes

reference designation according to IEC 81346-2 (2009)K

Highest safety class achievable in safety mode

acc. to EN 954Cat. 3 (single-channel), Cat. 4 (two-channel)

Performance level according to ISO 13849-1PLe

SIL acc. to IEC 61508SIL 3

Use in hazardous areas

ATEX markingII 2 G (1) GD Ex ib[ia Ga][ia IIIC Da] IIC T4 GB and I M2 Ex ib[ia Ma] I Mb