How can I get a price quote for Siemens 6ES7134-7SD51-0AB0?

You can request a fast quote for Siemens 6ES7134-7SD51-0AB0 from Yılsa Engineering. Reference part number CEY-8EF3B02EBE52. Submit a request via the contact or quote form and our team replies shortly with price and lead time.

Is Siemens 6ES7134-7SD51-0AB0 in stock and what is the delivery time?

Yılsa Engineering sources products as genuine items through a wide supplier network. Typical lead time is 7-21 days, with 1-3 business days domestic transit in Türkiye. Current status is confirmed in the quote.

Is Siemens 6ES7134-7SD51-0AB0 genuine and new?

Yes. This Siemens product is supplied genuine and brand-new, sold with invoice under Yılsa Engineering assurance.

How do I get the datasheet and technical specs for Siemens 6ES7134-7SD51-0AB0?

Key technical specifications are listed on the product page. For the full datasheet, dimensions and compatibility, simply contact Yılsa Engineering.

Click to zoom

Photo may not represent actual item. Refer to name and product specs for all details.

Siemens 6ES7134-7SD51-0AB0

SIMATIC, electronic module for ET200iSP, 4 AI, RTD, for connection of resistance thermometers PT100/NI100, Ex ib (ia Ga) IIC T4 Gb, Ex ib [ia IIIC Da] IIC T4 Gb, Ex ib [ia] I Mb

SiemensMFR # 6ES7134-7SD51-0AB0SKU # CEY-8EF3B02EBE52

Product type designation4AI RTD

HW functional status4

Firmware versionV1.1.0

Isochronous modeNo

Reparameterization possible in RUNYes

Rack mountingNo

Have questions?Chat on WhatsApp

About This Product

SIMATIC, electronic module for ET200iSP, 4 AI, RTD, for connection of resistance thermometers PT100/NI100, Ex ib (ia Ga) IIC T4 Gb, Ex ib [ia IIIC Da] IIC T4 Gb, Ex ib [ia] I Mb

Siemens 6ES7134-7SD51-0AB0

Genuine, certified Siemens product
Fast sourcing through a worldwide supply network
Product selection and compatibility support from our technical team
Equivalent and alternative product suggestions
Quotation and lead time tailored to your request

Specifications

General information

Product type designation4AI RTD

HW functional status4

Firmware versionV1.1.0

Product function

Isochronous modeNo

CiR - Configuration in RUN

Reparameterization possible in RUNYes

Installation type/mounting

Rack mountingNo

Front mountingYes

Rail mountingYes

Wall mounting/direct mountingNo

Supply voltage

Type of supply voltageDC

permissible range, lower limit (DC)20.4 V

permissible range, upper limit (DC)28.8 V

Input current

Current consumption, typ.19 mA

from load voltage (power bus), max.22 mA

Power loss

Power loss, typ.0.4 W

Hardware configuration

Fieldbus connection via separate transceiverYes

Analog inputs

Number of analog inputs4

Cycle time (all channels) max.320 ms; 66 ms basic conversion time x 4 channels with interference frequency suppression 60 Hz, 80 ms basic conversion time x 4 channels with interference frequency suppression 50 Hz

Technical unit for temperature measurement adjustableYes

Input ranges

VoltageNo

CurrentNo

ThermocoupleNo

Resistance thermometerYes

ResistanceYes

Input ranges (rated values), resistance thermometer

Ni 100Yes

— Input resistance (Ni 100)2 000 kΩ

Pt 100Yes

— Input resistance (Pt 100)2 000 kΩ

Input ranges (rated values), resistors

0 to 600 ohmsYes; also 1 000 ohms

— Input resistance (0 to 600 ohms)1 000 kΩ

Characteristic linearization

ParameterizableYes

— for resistance thermometerYes

Cable length

shielded, max.500 m

Analog value generation for the inputs

Measurement principleintegrating (Sigma-Delta)

Integration and conversion time/resolution per channel

Resolution with overrange (bit including sign), max.16 bit

Integration time, parameterizableYes

Basic conversion time, including integration time (ms)80 ms at 50 Hz; 66 ms at 60 Hz

— additional conversion time for wire-break monitoring5 ms

Interference voltage suppression for interference frequency f1 in Hz50 / 60 Hz

Smoothing of measured values

parameterizableYes; in 4 stages

Step: NoneYes; 1x cycle time

Step: lowYes; 4x cycle time

Step: MediumYes; 32x cycle time

Step: HighYes; 64x cycle time

Connection of signal encoders

for resistance measurement with two-wire connectionYes

for resistance measurement with three-wire connectionYes

for resistance measurement with four-wire connectionYes

Errors/accuracies

Linearity error (relative to input range), (+/-)0.015 %

Temperature error (relative to input range), (+/-)0.02 %/K

Crosstalk between the inputs, min.-50 dB

Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)0.01 %

Operational error limit in overall temperature range

Resistance thermometer, relative to input range, (+/-)0.15 %; Applies to resistances standard ±0.8 K, climatic ±0.3 K

Basic error limit (operational limit at 25 °C)

Resistance thermometer, relative to input range, (+/-)0.1 %; Applies to resistances standard ±0.5 K, climatic ±0.2 K

Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency

Series mode interference (peak value of interference < rated value of input range), min.70 dB

Common mode interference, min.90 dB

Interfaces

Number of PROFINET interfaces0

Protocols

Supports protocol for PROFINET IONo

PROFIsafeNo

PROFIBUSNo

Further protocols

other bus systemsNo

Alarms

Diagnostic alarmYes

Limit value alarmYes

Diagnoses

Diagnostic information readableYes

Wire breakYes; R > 2 kOhm

Short-circuitYes

Group errorYes

Diagnostics indication LED

Group error SF (red)Yes

Ex(i) characteristics

Module for Ex(i) protectionYes; for more Co/Lo combinations, see certificate IECEx KEM 05.0009

maximum values for connecting terminals for gas group IIC

Uo (no-load voltage), max.5.9 V

Io (short-circuit current), max.24 mA

Po (power output), max.36 mW

Co (permissible external capacity), max.43 µF

Lo (permissible external inductivity), max.50 mH

Potential separation analog inputs

between the channelsNo

between the channels and backplane busYes

Between the channels and load voltage L+Yes; Channels and power bus

Degree and class of protection

IP degree of protectionIP30

Standards, approvals, certificates

CE markCE 0344

UKCA markDEKRA 21UKEX0088 Importer UK: Siemens plc Manchester M20 2UR

cULusLISTED E334384

FM approvalCLASSIFIED 3025852

Suitable for safety functionsNo

INMETRO certificateUL-BR 12.0069

reference designation according to IEC 81346-2 (2009)K

Highest safety class achievable in safety mode

acc. to EN 954n.a.

Performance level according to ISO 13849-1none

SIL acc. to IEC 61508No

Use in hazardous areas

ATEX markingII 2 G (1) G Ex ib [ia Ga] IIC T4 Gb II 2 G (1) D Ex ib [ia IIIC Da] IIC T4 Gb I M2 Ex ib [ia] I Mb

ATEX certificateKEMA 04 ATEX 1247

IECExIECEx KEM 05.0009

CCC Ex2020322316002944

EAC ExPB Ex ib [ia] I Mb 1Ex ib [ia Ga] IIC T4 Gb [Ex ia Da] IIIC

FM markingClass I, Zone 1 AEx ib [ia] IIC T4 Ex ib IIC T4 NI, Class I, DIV.2, GP. A,B,C,D T4 AIS, Class I, DIV.1, GP. A,B,C,D T4 DIP Class II, III, GP. E,F,G

Explosion protection category for gasATEX gas explosion protection, Zone 1

Explosion protection category for dustATEX dust explosion protection, Zone 21 always install in corresponding enclosure

associated equipment (Ex ia)Yes

associated equipment (Ex ib)Yes

Marine approval

Germanischer Lloyd (GL)Yes

American Bureau of Shipping (ABS)Yes

Bureau Veritas (BV)Yes

Det Norske Veritas (DNV)Yes

Connection method

Design of electrical connectionScrew/spring-type terminal

Dimensions