How can I get a price quote for Siemens 6ES7131-7RF00-0AB0?

You can request a fast quote for Siemens 6ES7131-7RF00-0AB0 from Yılsa Engineering. Reference part number CEY-937FC77CCB9D. Submit a request via the contact or quote form and our team replies shortly with price and lead time.

Is Siemens 6ES7131-7RF00-0AB0 in stock and what is the delivery time?

Yılsa Engineering sources products as genuine items through a wide supplier network. Typical lead time is 7-21 days, with 1-3 business days domestic transit in Türkiye. Current status is confirmed in the quote.

Is Siemens 6ES7131-7RF00-0AB0 genuine and new?

Yes. This Siemens product is supplied genuine and brand-new, sold with invoice under Yılsa Engineering assurance.

How do I get the datasheet and technical specs for Siemens 6ES7131-7RF00-0AB0?

Key technical specifications are listed on the product page. For the full datasheet, dimensions and compatibility, simply contact Yılsa Engineering.

Click to zoom

Photo may not represent actual item. Refer to name and product specs for all details.

Siemens 6ES7131-7RF00-0AB0

SIMATIC, electronic module, for ET200iSP, 8 DI NAMUR, Ex ib (ia Ga) IIC T4 Gb, Ex ib [ia IIIC Da] IIC T4 Gb, Ex ib [ia] I Mb

SiemensMFR # 6ES7131-7RF00-0AB0SKU # CEY-937FC77CCB9D

Product type designation8DI NAMUR

HW functional status12

Firmware versionV1.1.1

Reparameterization possible in RUNYes

Rack mountingNo

Front mountingYes

Have questions?Chat on WhatsApp

About This Product

SIMATIC, electronic module, for ET200iSP, 8 DI NAMUR, Ex ib (ia Ga) IIC T4 Gb, Ex ib [ia IIIC Da] IIC T4 Gb, Ex ib [ia] I Mb

Siemens 6ES7131-7RF00-0AB0

Genuine, certified Siemens product
Fast sourcing through a worldwide supply network
Product selection and compatibility support from our technical team
Equivalent and alternative product suggestions
Quotation and lead time tailored to your request

Specifications

General information

Product type designation8DI NAMUR

HW functional status12

Firmware versionV1.1.1

CiR - Configuration in RUN

Reparameterization possible in RUNYes

Installation type/mounting

Rack mountingNo

Front mountingYes

Rail mountingYes

Wall mounting/direct mountingNo

Supply voltage

Type of supply voltageDC

permissible range, lower limit (DC)20.4 V

permissible range, upper limit (DC)28.8 V

Input current

Current consumption, typ.80 mA

from load voltage (power bus), max.90 mA

Power loss

Power loss, typ.1.1 W

Hardware configuration

Fieldbus connection via separate transceiverYes

Digital inputs

Number of digital inputs8

Digital input functions, parameterizable

— Number, max.2; normal and periodic count function

— Counting frequency, max.5 kHz; with a cable length of 20 m: 5 kHz; with a cable length of 100 m: 1 kHz; with a cable length of 200 m: 500 Hz

Input voltage

Type of input voltageDC

Input current

for signal "0", max. (permissible quiescent current)1.2 mA

for signal "1", min.2.1 mA

Input delay (for rated value of input voltage)

Delay time for signal change, min.2.8 ms

Delay time for signal change, max.3.5 ms

for standard inputs

— at "0" to "1", min.2.8 ms

— at "0" to "1", max.3.5 ms

— at "1" to "0", min.2.8 ms

— at "1" to "0", max.3.5 ms

Cable length

shielded, max.500 m

Encoder

Number of connectable encoders, max.8

Connectable encoders

NAMUR encoderYes

Interfaces

Number of PROFINET interfaces0

Number of RS 485 interfaces0

Protocols

PROFINET IONo

PROFIsafeNo

PROFIBUSNo

Interrupts/diagnostics/status information

Diagnostics functionYes

Alarms

Diagnostic alarmYes; Parameterizable

Hardware interruptNo

Diagnoses

Diagnostic information readableYes

Wire breakYes; I load < 0.2 mA with NAMUR encoders/encoders and NAMUR changeover contact/encoders to DIN 19234

short-circuitYes; R load < 150 ohms with NAMUR sensor/sensor and NAMUR changeover contact/sensor to DIN 19234

Diagnostics indication LED

Group error SF (red)Yes

Status indicator digital input (green)Yes

Integrated Functions

Frequency measurementYes; (Gate time) 50 ms; 200 ms; 1 s

Number of frequency meters2

Ex(i) characteristics

Module for Ex(i) protectionYes; for more Co/Lo combinations, see certificate IECEx KEM 05.0010

maximum values for connecting terminals for gas group IIC

Uo (no-load voltage), max.9.6 V

Io (short-circuit current), max.16 mA

Po (power output), max.38 mW

Co (permissible external capacity), max.3.6 µF

Lo (permissible external inductivity), max.110 mH

Potential separation digital inputs

between the channelsNo

between the channels and backplane busYes

Permissible potential difference

between different circuits60 V DC/30 V AC

Degree and class of protection

IP degree of protectionIP30

Standards, approvals, certificates

CE markCE 0344

UKCA markDEKRA 21UKEX0084 Importer UK: Siemens plc Manchester M20 2UR

cULusLISTED E334384

FM approvalCLASSIFIED 3025852

Suitable for safety functionsNo

INMETRO certificateUL-BR 12.0068

reference designation according to IEC 81346-2 (2009)K

Use in hazardous areas

ATEX markingII 2 G (1) G Ex ib [ia Ga] IIC T4 Gb II 2 G (1) D Ex ib [ia IIIC Da] IIC T4 Gb I M2 Ex ib [ia] I Mb

ATEX certificateKEMA 04 ATEX 1248

IECExIECEx KEM 05.0010

CCC Ex2020322310002637

EAC ExPB Ex ib [ia] I Mb 1Ex ib [ia Ga] IIC T4 Gb [Ex ia Da] IIIC

FM markingClass I, Zone 1 AEx ib [ia] IIC T4 Ex ib IIC T4 NI, Class I, DIV.2, GP. A,B,C,D T4 AIS, Class I, DIV.1, GP. A,B,C,D T4 DIP Class II, III, GP. E,F,G

Explosion protection category for gasATEX gas explosion protection, Zone 1

Explosion protection category for dustATEX dust explosion protection, Zone 21 always install in corresponding enclosure

associated equipment (Ex ia)Yes

associated equipment (Ex ib)Yes

Marine approval

Germanischer Lloyd (GL)Yes

American Bureau of Shipping (ABS)Yes

Bureau Veritas (BV)Yes

Det Norske Veritas (DNV)Yes

Connection method

Design of electrical connectionScrew/spring-type terminal

Dimensions