General information
Product type designationKP300 Basic mono PN
based on6AV6647-0AH11-3AX1
Display
Design of displayFSTN
Screen diagonal3.6 in
Display width87 mm
Display height31 mm
Number of colors4; backlit display only (white, red, green, yellow)
Resolution (pixels)
Horizontal image resolution240 pixel
Vertical image resolution80 pixel
Backlighting
MTBF backlighting (at 25 °C)50 000 h
Backlight dimmableNo
Keyboard
— Number of function keys10
— Number of function keys with LEDs0
Keys with LEDNo
System keysYes
Numeric keyboardYes; Keyboard
alphanumeric keyboardYes; Keyboard
Touch operation
Design as touch screenNo; without
Installation type/mounting
Mounting positionvertical
Rack mountingNo
Wall mounting/direct mountingNo
Mounting in portrait format possibleNo
Mounting in landscape format possibleYes
maximum permissible angle of inclination without external ventilation35°
Supply voltage
Type of supply voltageDC
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Input current
Current consumption (rated value)0.1 A
Starting current inrush I²t0.5 A²·s
Power
Active power input, typ.3 W
Processor
Processor typeRISC 32 bit
Storage
FlashYes
RAMYes
Memory available for user data1 Mbyte
Type of output
BuzzerNo
SpeakerNo
Clock
Hardware clock (real-time)No
Software clockYes
retentiveNo
synchronizableYes
Interfaces
Number of industrial Ethernet interfaces1
Number of RS 485 interfaces0
Number of RS 422 interfaces0
Number of RS 232 interfaces0
Number of USB interfaces0
Number of 20 mA interfaces (TTY)0
Number of parallel interfaces0
Number of other interfaces0
Number of SD card slots0
With software interfacesNo
Industrial Ethernet
Industrial Ethernet status LED2
Protocols
PROFINETYes
Supports protocol for PROFINET IONo
IRTNo
PROFIBUSNo
EtherNet/IPYes
MPINo
Protocols (Ethernet)
TCP/IPYes
DHCPYes
SNMPYes
DCPYes
LLDPYes
WEB characteristics
HTTPNo
HTMLNo
Media redundancy
— MRPNo
Further protocols
CANNo
MODBUSYes; Modicon (MODBUS TCP/IP)
Diagnoses
Diagnostic information readableNo
Isolation
Isolation tested with750 V DC (type test) and according to EN 50155 (routine test)
Emission of radio interference acc. to EN 55 011
Limit class A, for use in industrial areasYes
Limit class B, for use in residential areasNo
Degree and class of protection
IP (at the front)IP65
IP (rear)IP20
Enclosure Type 4 at the frontYes
Enclosure Type 4x at the frontYes
Railway application
EN 50121-3-2Yes; EMC for rail vehicles
EN 50121-4Yes; EMC for signal and telecommunications systems
EN 50124-1Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC
EN 50125-1Yes; Rail vehicles - see ambient conditions
EN 50125-2Yes; Stationary electrical equipment - see ambient conditions
EN 50125-3Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)
EN 50155Yes; rail vehicles - temperature class OT1, ST1/ST2, horizontal at vertical mounting position
EN 61373Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B
Fire protection acc. to EN 45545-2Yes; For proof of conformity, see Service & Support
Operation (vertical installation)
— For vertical installation, min.-25 °C; = Tmin
— For vertical installation, max.60 °C; = Tmax; +70 °C for 10 min (OT1, ST1/ST2 acc. to EN 50155)
Operation (max. tilt angle)
— At maximum tilt angle, min.-25 °C; = Tmin
— At maximum tilt angle, max.40 °C; = Tmax
Ambient temperature during storage/transportation
min.-25 °C
max.60 °C
Altitude during operation relating to sea level
Installation altitude above sea level, max.2 000 m
Ambient air temperature-barometric pressure-altitudeTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m)
Relative humidity
With condensation, tested in accordance with IEC 60068-2-38, max.100 %; RH incl. condensation/frost (no commissioning when condensation present), horizontal at vertical mounting position
Coolants and lubricants
— Resistant to commercially available coolants and lubricantsYes; Incl. diesel and oil droplets in the air
Use in stationary industrial systems
— to biologically active substances according to EN 60721-3-3Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
— to chemically active substances according to EN 60721-3-3Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to mechanically active substances according to EN 60721-3-3Yes; Class 3S4 incl. sand, dust, *
Use on land craft, rail vehicles and special-purpose vehicles
— to biologically active substances according to EN 60721-3-5Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request
— to chemically active substances according to EN 60721-3-5Yes; Class 5C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
— to mechanically active substances according to EN 60721-3-5Yes; Class 5S3 incl. sand, dust; *
Usage in industrial process technology
— Against chemically active substances acc. to EN 60654-4Yes; Class 3 (excluding trichlorethylene)
— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)
Remark
— Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04* The supplied plug covers must remain in place over the unused interfaces during operation!
Conformal coating
Coatings for printed circuit board assemblies acc. to EN 61086Yes; Class 2 for high reliability
Protection against fouling acc. to EN 60664-3Yes; Type 1 protection
Electronic equipment on rolling stock acc. to EN 50155Yes; Class PC2 protective coating acc. to EN 50155:2017
Military testing according to MIL-I-46058C, Amendment 7Yes; Discoloration of coating possible during service life
Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830AYes; Conformal coating, Class A
Operating systems
proprietaryYes
pre-installed operating system
Windows CENo
Configuration
Message indicatorYes
Alarm system (incl. buffer and acknowledgment)Yes
Process value display (output)Yes
Process value default (input) possibleYes
Recipe managementYes
Configuration software
STEP 7 Basic (TIA Portal)Yes; via integrated WinCC Basic (TIA Portal)
STEP 7 Professional (TIA Portal)Yes; via integrated WinCC Basic (TIA Portal)
WinCC flexible CompactNo
WinCC flexible StandardNo
WinCC flexible AdvancedNo
WinCC Basic (TIA Portal)Yes
WinCC Comfort (TIA Portal)Yes
WinCC Advanced (TIA Portal)Yes
WinCC Professional (TIA Portal)Yes
Online languages
Number of online/runtime languages5
Project languages
Languages per project32
Functionality under WinCC (TIA Portal)
LibrariesYes
Applications/optionsnone
Web browserNo
SIMATIC WinCC Sm@rtServerNo
time-controlledNo
task-controlledYes
Help systemYes
Number of characters per info text320
Message system
Number of alarm classes32
Bit messagesYes
— Number of bit messages200
Analog messagesYes
— Number of analog messages15
System messages HMIYes
System event, more (SIMATIC S7, SINUMERIK, SIMOTION, ... )No
Number of characters per message80
Number of process values per message8
Message indicatorYes
— Number of entries256
— Circulating bufferYes
— retentiveYes
— maintenance-freeYes
Recipe management
Number of recipes5
Data records per recipe20
Entries per data record20
Size of internal recipe memory40 kbyte
Recipe memory expandableNo
Variables
Number of variables per device250
Number of variables per screen30
Limit valuesYes
MultiplexingYes
StructuresNo
ArraysYes
Images
Number of configurable images50
Permanent window/defaultYes
Global imageYes
Image selection by PLCYes
Image number in the PLCYes
Image objects
Number of objects per image30
Text fieldsYes
I/O fieldsYes
Graphic I/O fields (graphics list)Yes
Symbolic I/O fields (text list)Yes
Date/time fieldsYes
SwitchesYes
ButtonsYes
Graphic displayYes
IconsYes
Geometric objectsYes
Complex image objects
Number of complex objects per screen5
Alarm viewYes
Trend viewYes
User viewYes
Status/controlNo
Sm@rtClient viewNo
Recipe viewYes
f(x) trend viewNo
System diagnostics viewNo
Media PlayerNo
Bar graphsYes
SlidersNo
Pointer instrumentsNo
Analog/digital clockNo
Lists
Number of text lists per project150
Number of entries per text list30
Number of graphics lists per project100
Number of entries per graphics list30
Archiving
Number of archives per device0
Security
Number of user groups50
Number of user rights32
Number of users50
Password export/importNo
SIMATIC LogonNo
Character sets
— US EnglishYes
Transfer (upload/download)
MPI/PROFIBUS DPNo
USBNo
EthernetYes
using external storage mediumNo
Process coupling
S7-1200Yes
S7-1500Yes
S7-200Yes
S7-300/400Yes
LOGO!Yes
WinACYes
SINUMERIKNo
SIMOTIONNo
Allen Bradley (EtherNet/IP)Yes
Allen Bradley (DF1)No
Mitsubishi (MC TCP/IP)Yes
Mitsubishi (FX)No
OMRON (FINS TCP)No
OMRON (Host Link)No
Modicon (Modbus TCP/IP)Yes
Modicon (Modbus RTU)No
Service tools/configuration aids
Backup/Restore manuallyYes
Backup/Restore automaticallyNo
SimulationYes
Device switchoverYes
Peripherals/Options
PrinterNo
SIMATIC HMI MM memory card: Multi Media CardNo
SIMATIC HMI SD memory card: Secure Digital memory cardNo
USB memoryNo
Mechanics/material
PlasticYes
AluminumNo
Stainless steelNo
Dimensions
Width of the housing front165 mm
Height of housing front97 mm
Mounting cutout, width149 mm
Mounting cutout, height82 mm
mounting depth30 mm
Weights
Weight (without packaging)0.25 kg
Weight (with packaging)0.38 kg