How can I get a price quote for Siemens 6AG1134-6LB00-2DA0?

You can request a fast quote for Siemens 6AG1134-6LB00-2DA0 from Yılsa Engineering. Reference part number YLSFQLFDAXULOJ. Submit a request via the contact or quote form and our team replies shortly with price and lead time.

Is Siemens 6AG1134-6LB00-2DA0 in stock and what is the delivery time?

Yılsa Engineering sources products as genuine items through a wide supplier network. Typical lead time is 7-21 days, with 1-3 business days domestic transit in Türkiye. Current status is confirmed in the quote.

Is Siemens 6AG1134-6LB00-2DA0 genuine and new?

Yes. This Siemens product is supplied genuine and brand-new, sold with invoice under Yılsa Engineering assurance.

How do I get the datasheet and technical specs for Siemens 6AG1134-6LB00-2DA0?

Key technical specifications are listed on the product page. For the full datasheet, dimensions and compatibility, simply contact Yılsa Engineering.

Click to zoom

Photo may not represent actual item. Refer to name and product specs for all details.

Siemens 6AG1134-6LB00-2DA0

SIPLUS ET 200SP AI 2xSG 4/6 wire HS based on 7MH4134-6LB00-0DA0 with conformal coating, -40...+70 °C input module, AI 2 X SG 4-/6-wire High Speed, two-channel analog input module for strain gage (full bridges), color code CC00, module diagnostics, 28/16 bits, 2xLC load cell interface (1-4 mV/V), suitable for BU type U0, pack quantity: 1 unit

SiemensMFR # 6AG1134-6LB00-2DA0SKU # YLSFQLFDAXULOJ

Product type designationAI 2xSG 4-/6-wire HS

FW update possibleYes

based on7MH4134-6LB00-0DA0

usable BaseUnitsBU type A0

I&M dataYes; I&M0 to I&M3

Isochronous modeYes

Have questions?Chat on WhatsApp

About This Product

Siemens 6AG1134-6LB00-2DA0

Genuine, certified Siemens product
Fast sourcing through a worldwide supply network
Product selection and compatibility support from our technical team
Equivalent and alternative product suggestions
Quotation and lead time tailored to your request

Specifications

General information

Product type designationAI 2xSG 4-/6-wire HS

FW update possibleYes

based on7MH4134-6LB00-0DA0

usable BaseUnitsBU type A0

Color code for module-specific color-coded labelCC00

Product function

I&M dataYes; I&M0 to I&M3

Isochronous modeYes

Measuring range scalableYes

Scalable measured valuesNo

Adjustment of measuring rangeYes; ±0.5 ... 320 mV/V

Engineering with

STEP 7 TIA Portal configurable/integrated from versionsee entry ID: 109746275

Operating mode

OversamplingYes; 2 channels per module

MSINo

CiR - Configuration in RUN

Reparameterization possible in RUNYes

Calibration possible in RUNNo

Supply voltage

Rated value (DC)24 V

permissible range, lower limit (DC)19.2 V

permissible range, upper limit (DC)28.8 V

Reverse polarity protectionYes

Input current

Current consumption (rated value)70 mA

Encoder supply

Output voltage (DC)4.85 V

Short-circuit protectionYes

Output current

Rated value60 mA; Per channel

Power

Power consumption from the backplane bus65 mW

Power loss

Power loss, typ.1.5 W

Address space per module

Address space per module, max.32 byte

Inputs32 byte

Outputs8 byte

Hardware configuration

Automatic encodingYes

Mechanical coding elementYes

Type of mechanical coding elementType A

Analog inputs

Number of analog inputs2; Differential inputs

Cycle time (all channels), min.100 µs

Analog input with oversamplingYes

Values per cycle, max.14

Resolution, min.100 µs

Input ranges

Strain gauges (full bridges)Yes

Cable length

shielded, max.500 m

Analog value generation for the inputs

Measurement principleSigma Delta

Integration and conversion time/resolution per channel

Resolution with overrange (bit including sign), max.28 bit; 16 bits with oversampling

Integration time, parameterizableYes

Interference voltage suppression for interference frequency f1 in Hz60 / 50 Hz / no

Conversion time (per channel)100 µs

Smoothing of measured values

IIR low-pass filter frequency0.01 ... 600 Hz

IIR low-pass filter ordinal number1 ... 4

Notch filter frequency0.1 ... 1 000 Hz

Notch filter quality5.00 ... 250.00

Average value filter0.1 ... 655.3 ms

Connection of signal encoders

For strain gauges (full bridges) with 4-conductor connectionYes

For strain gauges (full bridges) with 6-conductor connectionYes

Resistance of full bridge, min.80 Ω

Resistance of full bridge, max.5 000 Ω

Errors/accuracies

Linearity error (relative to input range), (+/-)0.025 %

Temperature error (relative to input range), (+/-)0.0005 %/°C; Strain gauge full bridge, 6-conductor connection

Temperature coefficient, zero point≤ ±0.25 μV/K

Temperature coefficient, span, 4-wire connection (in relation to end value)≤ ±5 ppm/K

Temperature coefficient, span, 6-wire connection (in relation to end value)≤ ±10 ppm/K

Basic error limit (operational limit at 25 °C)

Voltage, relative to input range, (+/-)0.05 %; See manual for details

Isochronous mode

Filtering and processing time (TCI), min.87 µs

Bus cycle time (TDP), min.125 µs

Interrupts/diagnostics/status information

Diagnostics functionYes; Diagnostic alarm

Alarms

Diagnostic alarmYes; Parameterizable

Limit value alarmYes; two upper and two lower limit values in each case

Diagnoses

Monitoring the supply voltageYes

Wire breakYes

Short-circuitYes

Group errorYes

Overflow/UnderflowYes

Diagnostics indication LED

Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED

Channel status displayYes; green LED

for channel diagnosticsYes; red LED

for module diagnosticsYes; green/red DIAG LED

Potential separation channels

between the channelsNo

between the channels and backplane busYes

between the channels and the power supply of the electronicsYes

Isolation

Isolation tested with707 V DC (type test)

Ambient temperature during operation

horizontal installation, min.-40 °C; = Tmin (incl. condensation/frost)

horizontal installation, max.60 °C; = Tmax; +70 °C with spacing modules (6AG1193-6BN00-7BA0) or configured slots to the left and right of the module

vertical installation, min.-40 °C; = Tmin

vertical installation, max.50 °C; = Tmax

Altitude during operation relating to sea level

Installation altitude above sea level, max.5 000 m

Ambient air temperature-barometric pressure-altitudeTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)

Relative humidity

With condensation, tested in accordance with IEC 60068-2-38, max.100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation

Coolants and lubricants

— Resistant to commercially available coolants and lubricantsYes; Incl. diesel and oil droplets in the air

Use in stationary industrial systems

— to biologically active substances according to EN 60721-3-3Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request

— to chemically active substances according to EN 60721-3-3Yes; Class 3C4 (RH < 75%) incl. salt spray acc. to EN 60068-2-52 (severity degree 3)

— to mechanically active substances according to EN 60721-3-3Yes; Class 3S4 incl. sand, dust

— Against mechanical environmental conditions acc. to EN 60721-3-3Yes; Class 3M8 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0//6AG1193-6AB00-0AA0)

Use on ships/at sea

— to biologically active substances according to EN 60721-3-6Yes; Class 6B2 mold, fungal and dry rot spores (excluding fauna)

— to chemically active substances according to EN 60721-3-6Yes; Class 6C3 (RH < 75%) incl. salt spray acc. to EN 60068-2-52 (severity degree 3).

— to mechanically active substances according to EN 60721-3-6Yes; Class 6S3 incl. sand, dust

— Against mechanical environmental conditions acc. to EN 60721-3-6Yes; class 6M4 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0/6AG1193-6AB00-0AA0)

Usage in industrial process technology

— Against chemically active substances acc. to EN 60654-4Yes; Class 3 (excluding trichlorethylene)

— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)

Conformal coating

Coatings for printed circuit board assemblies acc. to EN 61086Yes; Class 2 for high reliability

Protection against fouling acc. to EN 60664-3Yes; Type 1 protection

Military testing according to MIL-I-46058C, Amendment 7Yes; Discoloration of coating possible during service life

Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830AYes; Conformal coating, Class A

Dimensions

Width15 mm

Height73 mm

Depth58 mm

Weights

Weight, approx.30 g

Accessories 4

Genuine accessories that can be used with the Siemens 6AG1134-6LB00-2DA0 motor and are supplied separately are listed below. Click a code to open the accessory page and see the other compatible motors.

Part no	Description	Compatible motors
6AG1193-6BP00-7BA0	Zorunlu ek ürün · BaseUnit
6AG1193-6BP00-7DA0	Zorunlu ek ürün · BaseUnit
6AG1193-6BP20-7BA0	Zorunlu ek ürün · BaseUnit
6AG1193-6BP20-7DA0	Zorunlu ek ürün · BaseUnit