How can I get a price quote for Siemens 6AG1134-6HB00-2CA1?

You can request a fast quote for Siemens 6AG1134-6HB00-2CA1 from Yılsa Engineering. Reference part number CEY-8EF3B0388334. Submit a request via the contact or quote form and our team replies shortly with price and lead time.

Is Siemens 6AG1134-6HB00-2CA1 in stock and what is the delivery time?

Yılsa Engineering sources products as genuine items through a wide supplier network. Typical lead time is 7-21 days, with 1-3 business days domestic transit in Türkiye. Current status is confirmed in the quote.

Is Siemens 6AG1134-6HB00-2CA1 genuine and new?

Yes. This Siemens product is supplied genuine and brand-new, sold with invoice under Yılsa Engineering assurance.

How do I get the datasheet and technical specs for Siemens 6AG1134-6HB00-2CA1?

Key technical specifications are listed on the product page. For the full datasheet, dimensions and compatibility, simply contact Yılsa Engineering.

Click to zoom

Photo may not represent actual item. Refer to name and product specs for all details.

Siemens 6AG1134-6HB00-2CA1

SIPLUS ET 200SP AI 2xU/I 2/4-W HF based on 6ES7134-6HB00-0CA1 with conformal coating, -40…+60 °C, analog input module, suitable for BU type A0, A1, color code CC05, channel diagnostics, 16-bit, +/-0.1%

SiemensMFR # 6AG1134-6HB00-2CA1SKU # CEY-8EF3B0388334

Product type designationAI 2xU/I 2-/4-wire HF

Firmware versionV1.0

FW update possibleYes

based on6ES7134-6HB00-0CA1

usable BaseUnitsBU type A0, A1

I&M dataYes; I&M0 to I&M3

Have questions?Chat on WhatsApp

About This Product

Siemens 6AG1134-6HB00-2CA1

Genuine, certified Siemens product
Fast sourcing through a worldwide supply network
Product selection and compatibility support from our technical team
Equivalent and alternative product suggestions
Quotation and lead time tailored to your request

Specifications

General information

Product type designationAI 2xU/I 2-/4-wire HF

Firmware versionV1.0

FW update possibleYes

based on6ES7134-6HB00-0CA1

usable BaseUnitsBU type A0, A1

Color code for module-specific color-coded labelCC03

Product function

I&M dataYes; I&M0 to I&M3

Isochronous modeYes

Measuring range scalableNo

Engineering with

STEP 7 TIA Portal configurable/integrated from versionsee entry ID: 109746275

Operating mode

OversamplingNo

MSIYes

CiR - Configuration in RUN

Reparameterization possible in RUNYes

Calibration possible in RUNYes

Supply voltage

Rated value (DC)24 V

permissible range, lower limit (DC)19.2 V

permissible range, upper limit (DC)28.8 V

Reverse polarity protectionYes

Input current

Current consumption (rated value)39 mA; without sensor supply

24 V encoder supply

24 VYes

Short-circuit protectionYes

Output current, max.20 mA; max. 50 mA per channel for a duration < 10 s (two-wire)

Additional 24 V encoder supply

Short-circuit protectionYes; channel by channel

Output current, max.100 mA; max. 150 mA for a duration of < 10 s (four-wire)

Power loss

Power loss, typ.0.95 W; without sensor supply

Address space per module

Address space per module, max.4 byte; + 1 byte for QI information

Hardware configuration

Automatic encodingYes

Mechanical coding elementYes

Type of mechanical coding elementType A

Selection of BaseUnit for connection variants

2-wire connectionBU type A0, A1

4-wire connectionBU type A0, A1

Analog inputs

Number of analog inputs2; Differential inputs

For current measurement2

For voltage measurement2

permissible input voltage for voltage input (destruction limit), max.30 V

permissible input current for current input (destruction limit), max.50 mA

Analog input with oversamplingNo

Standardization of measured valuesYes

Input ranges (rated values), voltages

0 to +10 VYes; 15 bit

— Input resistance (0 to 10 V)75 kΩ

1 V to 5 VYes; 15 bit

— Input resistance (1 V to 5 V)75 kΩ

-10 V to +10 VYes; 16 bit incl. sign

— Input resistance (-10 V to +10 V)75 kΩ

-5 V to +5 VYes; 16 bit incl. sign

— Input resistance (-5 V to +5 V)75 kΩ

Input ranges (rated values), currents

0 to 20 mAYes; 15 bit

— Input resistance (0 to 20 mA)130 Ω

-20 mA to +20 mAYes; 16 bit incl. sign

— Input resistance (-20 mA to +20 mA)130 Ω

4 mA to 20 mAYes; 15 bit

— Input resistance (4 mA to 20 mA)130 Ω

Cable length

shielded, max.1 000 m; 200 m for voltage measurement

Analog value generation for the inputs

Measurement principleSigma Delta

Integration and conversion time/resolution per channel

Resolution with overrange (bit including sign), max.16 bit

Integration time, parameterizableYes

Integration time (ms)67.5 / 22.5 / 18.75 / 10 / 5 / 2.5 / 1.25 / 0.625 ms

Basic conversion time, including integration time (ms)68.03 / 22.83 / 19.03 / 10.28 / 5.23 / 2.68 / 1.43 / 0.730 ms

Interference voltage suppression for interference frequency f1 in Hz16.6 / 50 / 60 / 300 / 600 / 1 200 / 2 400 / 4 800

Conversion time (per channel)68.2 / 23 / 19.2 / 10.45 / 5.40 / 2.85 / 1.6 / 0.9 ms

Basic execution time of the module (all channels released)1 ms

Smoothing of measured values

Number of smoothing levels6; none; 2-/4-/8-/16-/32-fold

parameterizableYes

Connection of signal encoders

for voltage measurementYes

for current measurement as 2-wire transducerYes

— Burden of 2-wire transmitter, max.650 Ω

for current measurement as 4-wire transducerYes

Errors/accuracies

Linearity error (relative to input range), (+/-)0.01 %

Temperature error (relative to input range), (+/-)0.003 %/K

Crosstalk between the inputs, min.-50 dB

Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)0.01 %

Operational error limit in overall temperature range

Voltage, relative to input range, (+/-)0.2 %

Current, relative to input range, (+/-)0.2 %

Basic error limit (operational limit at 25 °C)

Voltage, relative to input range, (+/-)0.05 %; 0.1 % at SFU 4.8 kHz

Current, relative to input range, (+/-)0.05 %; 0.1 % at SFU 4.8 kHz

Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency

Common mode voltage, max.35 V

Common mode interference, min.90 dB

Isochronous mode

Filtering and processing time (TCI), min.800 µs

Bus cycle time (TDP), min.1 ms

Jitter, max.5 µs

Interrupts/diagnostics/status information

Diagnostics functionYes

Alarms

Diagnostic alarmYes

Limit value alarmYes; two upper and two lower limit values in each case

Diagnoses

Monitoring the supply voltageYes

Wire breakYes; Measuring range 4 to 20 mA only

Short-circuitYes; channel-by-channel, at 1 to 5 V or for short-circuit in encoder supply

Group errorYes

Overflow/UnderflowYes

Diagnostics indication LED

Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED

Channel status displayYes; green LED

for channel diagnosticsYes; red LED

for module diagnosticsYes; green/red DIAG LED

Potential separation channels

between the channelsYes

between the channels and backplane busYes

between the channels and the power supply of the electronicsYes

Isolation

Isolation tested with707 V DC (type test)

Ambient temperature during operation

horizontal installation, min.-40 °C; = Tmin (incl. condensation/frost)

horizontal installation, max.60 °C; = Tmax; +70 °C with spacing modules (6AG1193-6BN00-7BA0) or configured slots to the left and right of the module including derating of the encoder supply to max. 50 mA per channel

vertical installation, min.-40 °C; = Tmin (incl. condensation/frost); start-up @ -30 °C

vertical installation, max.50 °C; = Tmax

Altitude during operation relating to sea level

Installation altitude above sea level, max.5 000 m

Ambient air temperature-barometric pressure-altitudeTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)

Relative humidity

With condensation, tested in accordance with IEC 60068-2-38, max.100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation

Coolants and lubricants

— Resistant to commercially available coolants and lubricantsYes; Incl. diesel and oil droplets in the air

Use in stationary industrial systems

— to biologically active substances according to EN 60721-3-3Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request

— to chemically active substances according to EN 60721-3-3Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *

— to mechanically active substances according to EN 60721-3-3Yes; Class 3S4 incl. sand, dust, *

— Against mechanical environmental conditions acc. to EN 60721-3-3Yes; Class 3M8 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0)

Use on ships/at sea

— to biologically active substances according to EN 60721-3-6Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request

— to chemically active substances according to EN 60721-3-6Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *

— to mechanically active substances according to EN 60721-3-6Yes; Class 6S3 incl. sand, dust; *

— Against mechanical environmental conditions acc. to EN 60721-3-6Yes; Class 6M4 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0)

Usage in industrial process technology

— Against chemically active substances acc. to EN 60654-4Yes; Class 3 (excluding trichlorethylene)

— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)

Remark

— Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04* The supplied plug covers must remain in place over the unused interfaces during operation!

Conformal coating

Coatings for printed circuit board assemblies acc. to EN 61086Yes; Class 2 for high reliability

Protection against fouling acc. to EN 60664-3Yes; Type 1 protection

Military testing according to MIL-I-46058C, Amendment 7Yes; Discoloration of coating possible during service life

Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830AYes; Conformal coating, Class A

Dimensions

Width15 mm

Height73 mm

Depth58 mm

Weights

Weight, approx.32 g

Accessories 16

Genuine accessories that can be used with the Siemens 6AG1134-6HB00-2CA1 motor and are supplied separately are listed below. Click a code to open the accessory page and see the other compatible motors.

Part no	Description	Compatible motors
6AG1193-6BP40-7DA1	Aksesuar · BaseUnit
6AG1193-6BP00-7DA1	Aksesuar · BaseUnit
6AG1193-6BP00-7BA1	Aksesuar · BaseUnit
6AG1193-6BP20-7DA0	Aksesuar · BaseUnit
6AG1193-6BP20-7BA0	Aksesuar · BaseUnit
6AG1193-6BP00-7DA0	Aksesuar · BaseUnit
6AG1193-6BP00-7BA0	Aksesuar · BaseUnit
6AG1193-6BP40-7BA1	Aksesuar · BaseUnit
6AG1193-6BP40-7DA1	Zorunlu ek ürün · BaseUnit
6AG1193-6BP40-7BA1	Zorunlu ek ürün · BaseUnit
6AG1193-6BP00-7DA1	Zorunlu ek ürün · BaseUnit
6AG1193-6BP00-7BA1	Zorunlu ek ürün · BaseUnit
6AG1193-6BP20-7DA0	Zorunlu ek ürün · BaseUnit
6AG1193-6BP00-7DA0	Zorunlu ek ürün · BaseUnit
6AG1193-6BP20-7BA0	Zorunlu ek ürün · BaseUnit
6AG1193-6BP00-7BA0	Zorunlu ek ürün · BaseUnit