How can I get a price quote for Siemens 6AG1132-6HD01-7BB1?

You can request a fast quote for Siemens 6AG1132-6HD01-7BB1 from Yılsa Engineering. Reference part number YLSEL4CP1MFNGI. Submit a request via the contact or quote form and our team replies shortly with price and lead time.

Is Siemens 6AG1132-6HD01-7BB1 in stock and what is the delivery time?

Yılsa Engineering sources products as genuine items through a wide supplier network. Typical lead time is 7-21 days, with 1-3 business days domestic transit in Türkiye. Current status is confirmed in the quote.

Is Siemens 6AG1132-6HD01-7BB1 genuine and new?

Yes. This Siemens product is supplied genuine and brand-new, sold with invoice under Yılsa Engineering assurance.

How do I get the datasheet and technical specs for Siemens 6AG1132-6HD01-7BB1?

Key technical specifications are listed on the product page. For the full datasheet, dimensions and compatibility, simply contact Yılsa Engineering.

Click to zoom

Photo may not represent actual item. Refer to name and product specs for all details.

Siemens 6AG1132-6HD01-7BB1

SIPLUS ET 200SP RQ 4x 120V DC..230VAC/5A ST based on 6ES7132-6HD01-0BB1 with conformal coating, -40…+70 °C, relay module normally open, suitable for BU type B0 or B1, module diagnostics

SiemensMFR # 6AG1132-6HD01-7BB1SKU # YLSEL4CP1MFNGI

Product type designationRQ 4x120 VDC ... 230 VAC/5 A NO ST

FW update possibleNo

based on6ES7132-6HD01-0BB1

usable BaseUnitsBU type B0, B1

I&M dataYes; I&M0 to I&M3

Isochronous modeNo

Have questions?Chat on WhatsApp

About This Product

SIPLUS ET 200SP RQ 4x 120V DC..230VAC/5A ST based on 6ES7132-6HD01-0BB1 with conformal coating, -40…+70 °C, relay module normally open, suitable for BU type B0 or B1, module diagnostics

Siemens 6AG1132-6HD01-7BB1

Genuine, certified Siemens product
Fast sourcing through a worldwide supply network
Product selection and compatibility support from our technical team
Equivalent and alternative product suggestions
Quotation and lead time tailored to your request

Specifications

General information

Product type designationRQ 4x120 VDC ... 230 VAC/5 A NO ST

FW update possibleNo

based on6ES7132-6HD01-0BB1

usable BaseUnitsBU type B0, B1

Product function

I&M dataYes; I&M0 to I&M3

Isochronous modeNo

Engineering with

STEP 7 TIA Portal configurable/integrated from versionsee entry ID: 109746275

Operating mode

DQYes

DQ with energy-saving functionNo

PWMNo

OversamplingNo

MSONo

Redundancy

Redundancy capabilityYes

Supply voltage

Rated value (DC)24 V

permissible range, lower limit (DC)19.2 V

permissible range, upper limit (DC)28.8 V

Reverse polarity protectionYes

Input current

Current consumption (rated value)55 mA; without load

Output voltage

Rated value (AC)230 V

Power loss

Power loss, typ.1.5 W

Address space per module

Inputs+ 1 byte for QI information

Outputs1 byte

Hardware configuration

Automatic encodingYes

Mechanical coding elementYes

Type of mechanical coding elementtype C

Selection of BaseUnit for connection variants

2-wire connectionBU type B1

3-wire connectionBU type B0

Digital outputs

Type of digital outputRelays

Number of digital outputs4

Current-sinkingYes

Current-sourcingYes

Digital outputs, parameterizableYes

Short-circuit protectionNo

Parallel switching of two outputs

for logic linksYes

for upratingNo

for redundant control of a loadYes

Switching frequency

with resistive load, max.2 Hz

with inductive load (acc. to IEC 60947-5-1, DC13), max.0.5 Hz; provide one freewheeling diode for switching frequencies higher than 0.1 Hz

with inductive load (acc. to IEC 60947-5-1, AC15), max.0.5 Hz

on lamp load, max.2 Hz

Total current of the outputs

Current per channel, max.5 A; > +60 °C max. continuous current per relay 3 A

Current per module, max.20 A

horizontal installation

— up to 50 °C, max.20 A

— up to 60 °C, max.16 A

vertical installation

— up to 40 °C, max.20 A

— up to 50 °C, max.16 A; in all other mounting positions

Relay outputs

Number of relay outputs4

Rated supply voltage of relay coil L+ (DC)24 V

Current consumption of relays (coil current of all relays), max.40 mA

external protection for relay outputsYes, with miniature fuse max. 6 A tripping current and quick-response tripping characteristic

Number of operating cycles, max.7 000 000; see additional description in the manual

Switching capacity of contacts

— with inductive load, max.2 A; see additional description in the manual

— with resistive load, max.5 A; see additional description in the manual

— Thermal continuous current, max.5 A; Max. 1 385 VA, 150 W

— Switching current, min.100 mA; 5 V DC

— Rated switching voltage (DC)24 V DC to 120 V DC

— Rated switching voltage (AC)24V AC to 230V AC

Cable length

shielded, max.1 000 m

unshielded, max.200 m

Interrupts/diagnostics/status information

Diagnostics functionYes

Substitute values connectableYes

Alarms

Diagnostic alarmYes

Diagnoses

Monitoring the supply voltageYes

Wire breakNo

Short-circuitNo

Diagnostics indication LED

Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED

Channel status displayYes; green LED

for channel diagnosticsNo

for module diagnosticsYes; green/red DIAG LED

Potential separation channels

between the channelsYes

between the channels and backplane busYes

between the channels and the power supply of the electronicsYes

Permissible potential difference

between channels and backplane bus/supply voltage240 V AC

Isolation

Isolation tested with2 500 V DC (type test)

tested with

between channels and backplane bus/supply voltage2 500 V DC

between backplane bus and supply voltage707 V DC (type test)

Standards, approvals, certificates

Suitable for safety functionsNo

Ambient temperature during operation

horizontal installation, min.-40 °C; = Tmin (incl. condensation/frost)

horizontal installation, max.70 °C; = Tmax; see Derating BasedOn (e.g. manual), additionally Tmax > 60 °C max. continuous current of 3 A per relay

vertical installation, min.-40 °C; in all other mounting positions

vertical installation, max.50 °C; in all other mounting positions

Altitude during operation relating to sea level

Installation altitude above sea level, max.3 000 m

Ambient air temperature-barometric pressure-altitudeTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 1 K/100 m) at 795 hPa ... 701 hPa (+2 000 m ... +3 000 m)

Relative humidity

With condensation, tested in accordance with IEC 60068-2-38, max.100 %; incl. condensation / frost permitted (no commissioning under condensation conditions)

Coolants and lubricants

— Resistant to commercially available coolants and lubricantsYes; Incl. diesel and oil droplets in the air

Use in stationary industrial systems

— to biologically active substances according to EN 60721-3-3Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request

— to chemically active substances according to EN 60721-3-3Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *

— to mechanically active substances according to EN 60721-3-3Yes; Class 3S4 incl. sand, dust, *

— Against mechanical environmental conditions acc. to EN 60721-3-3Yes; Class 3M8 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0)

Use on ships/at sea

— to biologically active substances according to EN 60721-3-6Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request

— to chemically active substances according to EN 60721-3-6Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *

— to mechanically active substances according to EN 60721-3-6Yes; Class 6S3 incl. sand, dust; *

— Against mechanical environmental conditions acc. to EN 60721-3-6Yes; Class 6M4 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0)

Usage in industrial process technology

— Against chemically active substances acc. to EN 60654-4Yes; Class 3 (excluding trichlorethylene)

— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)

Remark

— Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04* The supplied plug covers must remain in place over the unused interfaces during operation!

Conformal coating

Coatings for printed circuit board assemblies acc. to EN 61086Yes; Class 2 for high reliability

Protection against fouling acc. to EN 60664-3Yes; Type 1 protection

Military testing according to MIL-I-46058C, Amendment 7Yes; Discoloration of coating possible during service life

Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830AYes; Conformal coating, Class A

Dimensions

Width20 mm

Height73 mm

Depth58 mm

Weights

Weight, approx.40 g

Accessories 1

Genuine accessories that can be used with the Siemens 6AG1132-6HD01-7BB1 motor and are supplied separately are listed below. Click a code to open the accessory page and see the other compatible motors.