How can I get a price quote for Siemens 6AG1132-6BD21-7BA0?

You can request a fast quote for Siemens 6AG1132-6BD21-7BA0 from Yılsa Engineering. Reference part number YLSGAYEASFICGL. Submit a request via the contact or quote form and our team replies shortly with price and lead time.

Is Siemens 6AG1132-6BD21-7BA0 in stock and what is the delivery time?

Yılsa Engineering sources products as genuine items through a wide supplier network. Typical lead time is 7-21 days, with 1-3 business days domestic transit in Türkiye. Current status is confirmed in the quote.

Is Siemens 6AG1132-6BD21-7BA0 genuine and new?

Yes. This Siemens product is supplied genuine and brand-new, sold with invoice under Yılsa Engineering assurance.

How do I get the datasheet and technical specs for Siemens 6AG1132-6BD21-7BA0?

Key technical specifications are listed on the product page. For the full datasheet, dimensions and compatibility, simply contact Yılsa Engineering.

Click to zoom

Photo may not represent actual item. Refer to name and product specs for all details.

Siemens 6AG1132-6BD21-7BA0

SIPLUS ET 200SP DQ 4x24 V DC/2 A ST, based on 6ES7132-6BD21-0BA0 with conformal coating -40...+70 °C output module DQ 4x24 V DC/2 A standard, source output (PNP,sourcing output) packing unit: 1 unit, suitable for BU type A0, color code CC02, substitute value output, module diagnostics for: short circuit to L+ and M, wire break, supply voltage

SiemensMFR # 6AG1132-6BD21-7BA0SKU # YLSGAYEASFICGL

Product type designationDQ 4x24VDC/2A ST

FW update possibleYes

based on6ES7132-6BD21-0BA0

usable BaseUnitsBU type A0

I&M dataYes; I&M0 to I&M3

Isochronous modeNo

Have questions?Chat on WhatsApp

About This Product

Siemens 6AG1132-6BD21-7BA0

Genuine, certified Siemens product
Fast sourcing through a worldwide supply network
Product selection and compatibility support from our technical team
Equivalent and alternative product suggestions
Quotation and lead time tailored to your request

Specifications

General information

Product type designationDQ 4x24VDC/2A ST

FW update possibleYes

based on6ES7132-6BD21-0BA0

usable BaseUnitsBU type A0

Color code for module-specific color-coded labelCC02

Product function

I&M dataYes; I&M0 to I&M3

Isochronous modeNo

Engineering with

STEP 7 TIA Portal configurable/integrated from versionsee entry ID: 109746275

Operating mode

DQYes

DQ with energy-saving functionNo

PWMNo

OversamplingNo

MSONo

Supply voltage

Rated value (DC)24 V

permissible range, lower limit (DC)19.2 V

permissible range, upper limit (DC)28.8 V

Reverse polarity protectionYes

Input current

Current consumption, max.20 mA; without load

Output voltage

Rated value (DC)24 V

Power loss

Power loss, typ.1 W

Address space per module

Address space per module, max.1 byte; + 1 byte for QI information

Hardware configuration

Automatic encodingYes

Mechanical coding elementYes

Type of mechanical coding elementType A

Selection of BaseUnit for connection variants

1-wire connectionBU type A0

2-wire connectionBU type A0

3-wire connectionBU type A0 with AUX terminals or potential distributor module

Digital outputs

Type of digital outputSource output (PNP, current-sourcing)

Number of digital outputs4

Current-sinkingNo

Current-sourcingYes

Digital outputs, parameterizableYes

output type acc. to IEC 61131, type 2Yes

Short-circuit protectionYes; Electronic

Response threshold, typ.2.8 to 5.2 A

Open-circuit detectionYes

Limitation of inductive shutdown voltage toTyp. L+ (-50 V)

Controlling a digital inputYes; supports input type 3 according to IEC 61131-2

Switching capacity of the outputs

with resistive load, max.2 A

with inductive load, max.2 A

on lamp load, max.10 W

Load resistance range

lower limit12 Ω

upper limit3 400 Ω

Output current

for signal "1" rated value2 A

for signal "1" permissible range, max.2 A

for signal "0" residual current, max.0.1 mA

Output delay with resistive load

"0" to "1", typ.50 µs

"1" to "0", typ.100 µs

Parallel switching of two outputs

for upratingNo

for redundant control of a loadYes

Switching frequency

with resistive load, max.100 Hz

with inductive load, max.0.1 Hz; higher frequencies are possible, see Equipment Manual "Maximum permitted switching frequency of inductive loads"

on lamp load, max.10 Hz

Total current of the outputs

Current per channel, max.2 A

Current per module, max.8 A; see Equipment Manual "Derating curve"

horizontal installation

— up to 30 °C, max.8 A

— up to 40 °C, max.8 A

— up to 50 °C, max.6 A

— up to 60 °C, max.4 A

vertical installation

— up to 30 °C, max.8 A

— up to 40 °C, max.6 A

— up to 50 °C, max.4 A

Cable length

shielded, max.1 000 m

unshielded, max.600 m

Interrupts/diagnostics/status information

Diagnostics functionYes

Substitute values connectableYes

Alarms

Diagnostic alarmYes

Diagnoses

Monitoring the supply voltageYes

— ParameterizableYes

Wire breakYes; module-wise

Short-circuit to groundYes; module-wise

Short-circuit to L+Yes; module-wise

Group errorYes

Diagnostics indication LED

Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED

Channel status displayYes; green LED

for channel diagnosticsNo

for module diagnosticsYes; green/red DIAG LED

Potential separation channels

between the channelsNo

between the channels and backplane busYes

Between the channels and load voltage L+No

Isolation

Isolation tested with707 V DC (type test)

Standards, approvals, certificates

Suitable for safety functionsNo

Ambient temperature during operation

horizontal installation, min.-40 °C; = Tmin (incl. condensation/frost)

horizontal installation, max.70 °C; = Tmax; > +60 °C max. total current 2 A

vertical installation, min.-40 °C; = Tmin

vertical installation, max.50 °C; = Tmax

Altitude during operation relating to sea level

Installation altitude above sea level, max.5 000 m

Ambient air temperature-barometric pressure-altitudeTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)

Relative humidity

With condensation, tested in accordance with IEC 60068-2-38, max.100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation

Coolants and lubricants

— Resistant to commercially available coolants and lubricantsYes; Incl. diesel and oil droplets in the air

Use in stationary industrial systems

— to biologically active substances according to EN 60721-3-3Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request

— to chemically active substances according to EN 60721-3-3Yes; Class 3C4 (RH < 75%) incl. salt spray acc. to EN 60068-2-52 (severity degree 3)

— to mechanically active substances according to EN 60721-3-3Yes; Class 3S4 incl. sand, dust

— Against mechanical environmental conditions acc. to EN 60721-3-3Yes; Class 3M8 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0//6AG1193-6AB00-0AA0)

Use on ships/at sea

— to biologically active substances according to EN 60721-3-6Yes; Class 6B2 mold, fungal and dry rot spores (excluding fauna)

— to chemically active substances according to EN 60721-3-6Yes; Class 6C3 (RH < 75%) incl. salt spray acc. to EN 60068-2-52 (severity degree 3).

— to mechanically active substances according to EN 60721-3-6Yes; Class 6S3 incl. sand, dust

— Against mechanical environmental conditions acc. to EN 60721-3-6Yes; class 6M4 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0/6AG1193-6AB00-0AA0)

Usage in industrial process technology

— Against chemically active substances acc. to EN 60654-4Yes; Class 3 (excluding trichlorethylene)

— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)

Conformal coating

Coatings for printed circuit board assemblies acc. to EN 61086Yes; Class 2 for high reliability

Protection against fouling acc. to EN 60664-3Yes; Type 1 protection

Military testing according to MIL-I-46058C, Amendment 7Yes; Discoloration of coating possible during service life

Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830AYes; Conformal coating, Class A

Dimensions

Width15 mm

Height73 mm

Depth58 mm

Weights

Weight, approx.30 g

Accessories 4

Genuine accessories that can be used with the Siemens 6AG1132-6BD21-7BA0 motor and are supplied separately are listed below. Click a code to open the accessory page and see the other compatible motors.

Part no	Description	Compatible motors
6AG1193-6BP00-7BA0	Aksesuar · BaseUnit
6AG1193-6BP00-7DA0	Aksesuar · BaseUnit
6AG1193-6BP20-7BA0	Aksesuar · BaseUnit
6AG1193-6BP20-7DA0	Aksesuar · BaseUnit