Photo may not represent actual item. Refer to name and product specs for all details.
Char-Lynn (Danfoss) 101-2633-009 Spool Valve Motors
Hydraulic Gerotor Spool Valve Motor - H-Series, 5.90 in³/r, 2-Bolt Flange - 3.25 in Pilot
ITEM #6904fa42db5b3f8c5929b6f7 MFR #101-2633-009 SKU #YLSEVLV9UX6ETIQ
Quick Specs
Series: H-Series
Displacement: 5.90 in³/r
Maximum RPM-Continuous: 192 rpm
Continuous Torque: 1368 in
Continuous Pressure: 1800 psi
Continuous Flow Rate: 15 gpm
Overview
Hydraulic Gerotor Spool Valve Motor - H-Series, 5.90 in³/r, 2-Bolt Flange - 3.25 in Pilot
Features and Benefits
- Time-tested Char-Lynn drive set
- Three moving components (gerotor-star, drive, and shaft)
- Optimized drive running angle
- Three-zone pressure design (inlet, return and case)
- Variety of displacements, shafts and mounts
- Special options to meet customer needs
Specifications
Series H-Series
Displacement 5.90 in³/r
Maximum RPM-Continuous 192 rpm
Continuous Torque 1368 in
Continuous Pressure 1800 psi
Continuous Flow Rate 15 gpm
Motor Port Type Straight Thread O-Ring SAE
Motor Port Size 7/8–14 UNF-2B
Shaft Type Splined
Output Shaft Size 7/8 in SAE - 13B Spline
Seal Type Standard
Case Drain No Case Drain
Inlet and Outlet Port Size Straight Thread O-ring SAE 7/8-14 UNF-2B Ports Size 10
Actual Port Type .875-14 Unf-2B O-ring Port, Size 10 Accepts Fittings For Sae J1926
Actual Output Shaft 22.22 [.875] Dia. Sae 13 Tooth Spline (Sae B)
Actual Mounting Flange Standard, 2 Bolt: 82.6 [3.25] Dia. X 3.0 [.12] Pilot, 13.59 [.535] Dia.
Max Operating Temperature 180 °F
Overall Height 3.87 in
Overall Length 6.60 in
Overall Width 5.27 in
Intermittent Flow Rate 18 gpm
Intermittent Pressure 2400 psi
Mounting Type 2-Bolt Flange - 3.25 in Pilot
Intermittent Torque 1829 in
Replacement Buna Seal Kit 007 Design - 60023-000, 008 & 009 Design - 60540-000
Replacement Viton Seal Kit 007 Design - 60032-000, 008 & 009 Design - 60544-000
Replacement Bearing Race 007, 008 & 009 Design - 7462-000
Replacement Needle Thrust Bearing 007, 008 & 009 Design - 7537-000
Replacement Output Shaft 007, 008 & 009 Design - 7360-016
Replacement Gerotor Sold Seprately 009 Design - 8277-003
Replacement Drive - Sold Separately 009 Design - 616-000
Replacement Short Cap Screw Mnt End 007, 008 & 009 Design - 16292-088 - 4 Required
Replacement Long Cap Screw Cap End 009 Design - 16294-175 - 7 Required
Replacement Rear Housing 009 Design - 22230-001, 008 & 007 Design - 7359-001
Replacement Mounting Flange 009 & 008 Design 22000-001, 007 Design 7463-000
Weight 11.8 lbs
Recommended Fluids Premium Quality, Anti-Wear Type Hydraulic Oil with A Viscosity Of Not Less Than 701 Sus or 13Cst with Best Range Of 100 - 200 Sus or 20 - 43 Cst At Operating Temperature,
Recommended Filtration Per Iso Cleanliness Code. Level 18/13
Repair Manual# 7-117
Repair Parts Drawing# 6-121
Manufacturer Product Page http://www.eatonpowersource.com/products/configure/motors/details/101-2633-009/
Manufacturer Catalog http://www.eaton.com/ecm/groups/public/@pub/@eaton/@hyd/documents/content/pll_1323.pdf
Parts and Repair Manual http://www.eaton.com/ecm/groups/public/@pub/@eaton/@hyd/documents/content/pct_1594418.pdf
Product Brochure http://www.eaton.com/ecm/groups/public/@pub/@eaton/@hyd/documents/content/pct_2870744.pdf
Max Continuous Oil Viscosity 100 Saybold universal second
Max System Operating Temperature -34°C to 82 °C
Port Configuration .875-14 UNF-2B SAE O-Ring Ports
Featured Products
Products we selected for you